Hello,
I read John Deere 8R with kess v2 clone over OBD and flashed mod file. Its a phoenix L33 ecu.
the machine is running fine - but shows fault code on display "520629.31 ECU Programmierfehler, ECU.001"
On mod file is no checksum correction. I thought kess v2 clone will done checksum correction but when writing I got error U 000:000 ......
so ive done writing via Recovery-function without get asked to choose ori file to compare - so I think there wasnt done any checksum corrrection ?!
In attachment is ori+mod file. maybe someone can check this and do checksum correction.
the tractor is many kilometers away so I need a good working solution - of course would pay for it when its working fine.
I have this panel which sometimes works regularly and when I turn off the car and then turn the ignition back on again only 3 triangle, airbag and ABS lights are on, the rest is all off and the car doesn't start, can you tell me which component is faulty?
I have p0605 dtc after having disabled the immobilizer on my 2013 kia optima 2.0 cvvl. The car starts and shutdown. Ecu part number: sim2k-245 39120-2etb0.
Here's the original and modified file.
Any help is welcome.
I have Audi a3 2003 year with VDO cluster 8P0920930G. I need PIN from second used cluster (I need to replace dashboard). Is it possible to read PIN from my read eeprom from this cluster? dump in attached.
I want to replace dashboards with vcds. Mayby there is other faster way to replace this dashboard.
I have: vcds, vvdi2, xtool, smok tool, carprog.
Hi. Is it possible to transfer immo from simos 10.12 to simos 10.10.?
second hand ecu 03f906070a (simos 10.12 - donor) and 03f906070df (simos 10.12 - ori).
Or is it possible immo off with no immo message on display?
engine is 105 ps. 1.2 tsi.
Is it possible to make ecu virgin and adapt to the car?
I'm willing to pay solution.
admin i'm sorry if i broke any rules ( not post in selling box).
tnx.
br
i hawe problem with this car.somebody remowe eeprom from ecu.car work fine but no power.i bay new eeprom 93c46 (old eeprom,with big legs)
car dont hawe ews or some immo box.ol integriset in bcm module under seat.
i try some dump,but no luck. can somebody help me whit this?
Hi
I need to change millage in eeprom to 187907km from 264709km can someone help? Eventualy if the vin must be change in eeprom or may be changed after write to dash?
Laguna III ph2 gasoline 2011yr
After quick scan for w203
EZS doesn’t show any MB number
ME SFI scan normally … show everything
Most of the units are not even shown in the scan
And the rest of the scan units cannot be reached even tho scanned and show serial number
I have a 2018 Ford Transit 2.0 with the “AdBlue” warning light on, and after driving 31 miles, it wouldn’t start. I tried resetting the AdBlue parameters and went through all the special functions using FORScan and IDS, but still no luck. I performed a static regeneration, which didn’t help either, and there are no DTCs showing up. I checked the injectors, and they’re working fine. I also attempted a software update for the PCM, but it didn’t resolve the issue. I drove another 6 miles, yet the problem persists, and it’s driving me crazy. I’m out of ideas!
Hi,
Im looking for a method to clone DQ200 , from old to new.
I saw that Godiag GT107 can connect to x431 obd.
Is it enough for cloning?
Or just for diagnose?
Hello, I have a ISTA license, ISPI, and ISTA launcher but don't know how to install it. Can anyone help me for a fee? Please send me whatsapp message +1-786-370-8348.
I've got a Fiat Panda 2003 1.2 8v with replaced ECU - IAW 5AF.SK HW603.
Someone replaced the original IAW ECU with the version from Panda BiPower (GAS Injection), and now I have problems:
- permament NCM-GAS communication error (that's obvious, there's no LPG ECU in my car)
- P0135 - lambda heater 1 resistance, new Lambda installed a month ago
- previous fuel mixture problems (does the GAS version have a different fuel map?)
I have seen that it is possible to program a different version into this ECU, for ex. 5AF.SK to 5AF.P4.
Does anybody have a dump from 5AF.P4, so I can try flashing that?
Hi All,
Please advise me which is the stronger pad for Toyota Immo car key work ( all Toyota old and new versions all regions) between OBSTAR X300 DP plus and XTOOL X100 Pad 3 please?
Thanks,
Bucknobs.
I want to use VehiCAL Logger, but I can't quite understand what exactly I need to pay for and what I will get.
From what I understand on the website, it costs around 62.40 EUR per month to use it. But what do I get for that amount? Can I log every one car, and if so, what parameters will I have access to? Logging speed?
Hi, Mercedes 2011 w246 B 1.8d. problem xentry or other diagnostic showing vin AAAAAAAAAAAAAAA and cant find automatic car. and In tank diesel pump strange working pulsing( we have replaced but same with another)
Can check or file ori or someone did something) thanks
Hello, I am looking for the best master for VAG. My question is Audi A4 2014 2.0L TFSI cars engine computer died, the owner brought me another working computer, then I did immo Off through the site neurosuite.ca the car started up, does not take gas, the gearbox does not go then I thought I did something wrong I know and read the form found out the firmware is not suitable and looked at the original engine computer cover sticker and there is such a number 8K5907115P_0001 and downloaded such a file 8K5907115P_0003 FRF and uploaded the firmware via VCP I have the original. well again the car does not start it says locked and also the gearbox gives an error (P1841 Engine / gearbox control unit options are incompatible) I'm already tired asking you please help me I have little experience, for VAG (I will make payment no problems)? 8K5907115P_0003 which I disconnected for the second time, Don't get me wrong, I'm already tired of this machine after a month?
![[Image: 4444b084a7cc7e8f3b6822891c9fb350.jpg]](https://uploads.tapatalk-cdn.com/20241109/4444b084a7cc7e8f3b6822891c9fb350.jpg)
