I have cas3 that needs elv counter reset.. BUT ON bench...
Cas3 removed from vehicle as no communication with vehicle due to faulty JBBE module. Unable to reset via obd2, 0volts.
Replacement jbbe fitted *different part numbers* no coding etc. Obd2 now connects with 12v. but still no communication with any modules (guessing it's due to used jbbe not being coded???)
Anyway old jbbe and donar jbbe removed from vehicle with cas module to be worked on bench..
Plan is to attempt to clone original jbbe to the used donar jbbe (if this works) cas still needs to be reset... Car is a fair distance away so I don't want to return to the car to reset elv, I'd rather do it on bench and send the modules back
So is there a way to reset elv counter on bench?
Available tools
Autel im508 pro
Keypadtool (vvdi)
Obdstar706
Inpa and tool 32(hasn't been used in years)
I have a cheap cas3 platform box but I will buy a godiag cas3 platform if advised to.
hello. I have a problem with a 2016 jeep cherokee. The gpec2a controller has been damaged and there is no communication with it. I already have a used one but I don't know how to start it.
Good evening, as most of you know I took a step back from the forum, and left tuning a long time ago, as most of you know I don't condone the tuning, but I don't support it at this point in my life,.the industry went a direction I wasn't comfortable with and it was my time to move onto the next chapter of my life, alot of you found me personally on social media and understand, why I did what I did, now that being said most of you know I did not want to do 12 days last year but I supported it for 1 last time.
This year I won't be supporting it, but please do it without me for the xmas season, again I won't be doing it, but please continue it on.
Ps if you find me on social media send me a hi and I'll friend you.
Thanks everyone for understanding, and I wish you all prosperous lives.
Hello friends of the forum, could you help me with an error in the GPS of the Ford EcoSport 2021 - Attached is an image of the error. I tried to install new software without success. I appreciate all help. I am willing to pay for it. Thank you.
1xPC Installation Packs ISTA Next 4.52.40 with Lifetime Update : 100 Euro
1xPC Installation Packs ISTA Next 4.52.40 without update lifetime license : 60 Eur
I can renew and activate all versions contact me privately on my Profile you will find my contact cordially
This has the mcu ST10F269 and external eeprom, car has multiple electrical issues like cluster flashing on and off, windows not working, can someone please check out the eeprom for me or if i need to upload the mcu file as well, thank you in advance. MCU was read in curcuit and eeprom was removed and read.
Hey Guys
I Have a original Vcds hex v2 Cable here with 3 Licenses wich are already used .
Is there a way i can flash it and get Unlimited License or any other Workaround for me to use it on more then 3 Cars ?
Hi everyone i need a mappack or damos for this file please, its for my new car a E30 swap M30B35
Thanks in advance
Hw : 0 261 200 179
Eprom : 1 267 356 460
I am looking for solution converting USA GM ( Chevrolet, Buick, Cadillac, GMC ) to EU specification:
* 0,2 step band frequencies
* EU languages
* EU maps if possible
Hello. I have problem with bmw e66 740li 2006 .When transmission is warmed up resistance beetwen pt can hi and lo signal raises and car has pt can communication issues.According to bmw etk mechatronic unit fits only from e65 lci models.
I have problem finding tcu from e65 lci.Gearbox is 6hp26,does anyone have idea if tcu from other bmw model will work ? bosch number 0260550012 .
Maybe clone data with bench programmer from e65 to e60 tcu ? But e60 has mechanical gear selector so it could be different hardware?
i guys, i need help with installing and running Subaru epc.
After i've installed the catalogue, on running it get out an error, internet explorer can't open it, on startup screen appears the logo but nothing, don't run it.
i've windows 7 on this pc.
i've try to write directly the address http://localhost:58089/subaru-epc/ logo and progress bar appear with the indication "please wait now loading" but nothing.
What is the correct procedure to install it? i follow some guide and video tutorial here but nothing.
![[Image: 7_c0885d56-441b-4788-926e-8c765299493c.j...&width=493]](https://www.vxdas.com/cdn/shop/products/7_c0885d56-441b-4788-926e-8c765299493c.jpg?v=1622864228&width=493)
