Hello,
it is possible to immo off on that ECU: 9X43-12A650-AB ??

For more information on how and with what tool, it would be possible to learn the donor ecu on the car, I will be thankful

Attached Files

Jaguar_Xtype_2.2dci_Delphi_mpc555.zip

4

234.16 KB

Download

Please ori file to
Bosch edc 17c19
Hardw 281017453
Soft 520094

Hi guys,

I need a stock file for this Peugeot expert 2.0hdi dcm6.2a 120hp

Hardware number: 9809447980
Software number: 9692280080

So I have downloaded Multiecuscan, I have the leads coming today. what do I need to look for to remove the speed limiter on the van? It was looked at by a company in Birmingham and they said they couldn't see a limiter in the ecu. Do I need a file written to override the limiter? I have looked and it is not hardwired in at all. Can anyone help me find out how to do this? thanks

Good morning,

i was given a cluster of a dmax as mileage was not increasing.  on opening it was clear that eeprom had been desoldered.  i have no idea what has been done to the eeprom but can someone increas the mileage from the current 83120 to 85120 and fix the issue with mileage not increasing please?

thanks

Attached Files

isuzu dmax 93c66.rar

5

466 bytes

Download

hi
please help me
Mitsubishi asx
Denso 4N13
need dpf off
thanks

hello everyone i need some help with the code for this radio im trying to use from another donor
 part number a212 900 67 23
me6950d1291164
 any help will be greatly appreciated  thanks

Hi ! I need ori file in ECU MD1CS006 Renault Kadjar - 10SW050497 10SW067061

HELP ME!

Is there any friend who can help me with the following questions? Thank you.

The diagnosis of W447 and W448 models cannot be logged in through the diagnostic scanner, and the diagnostic page pops up as follows:
<Caution !


Login failed .
For diagnostic access to this model series , a personalized login including authorization is required . It is recommended to request a personalized login or authorization now .
To submit a request , contact the administrator responsible for your service operation ( GEMS or authorization administrator ).>

Hi, can someone help with this ecu immo off please?

Fiat Panda 1.2 8v 69hp
Magneti Marelli 9GF.7T

Attached Files

Fiat_Panda_2012_1.2_8v_69_hp_Marelli_9GF_Bench_NR_Darek.rar

6

518.49 KB

Download

Hino DX3 1.24.5 (10.2024) Diagnostic Software

PRICE FOR 1PCS ($60)
PRICE WITH ACTIVATOR IN PM

Hi please work solution for immo off in mpc and epr edc17cp14
thanks
03l906022b

Attached Files

audi a4 edc17cp14 bench.rar

5

1.59 MB

Download

need to move data from ORG to DAWCA.
Thanks !!!

Hi,
Need solution for immo off for Skoda Fabia 1.4, EKU Magneti Merelli IAW4LV.AA, 036 906 034 BL. 
Thank you!

Attached Files

Eeprom Mereli 4LV.rar

22

414 bytes

Download

Hi guys!

Anyone know if can remove revo software with AT(back to stock)?

Want bench boot?


It’ VW Amarok 3L tdi with 224hp

Hello,
is here anybody, who can send me the software for excavator Liebherr A922 Rail with Master 4 unit ? I have the versions 4, 9 and 14. I need version number 13. The software is stored in the CF1 card.

Thanks and BR

N.

Caddy 2017 150,000 km stopped and has not restarted, The starter motor does turn,  it has crankshaft sensor reading and fuel pressure, only a breakdown in U112300 engine, has something like this happened to anyone? Thank you

Hello everyone!
Could you guess me please what is the procedure to swap the smarbox Toyota module with Autel 508?
I can`t clone it because of the processor is encrypted.
I have the old smarbox and new one (this is not brand new, but used. From another car) and I need to replace it.

Tried to read the smartbox processor with xHorse Multiprog but can`t do it, this is encrypted:
Chip ID detection succeeded! Chip ID is: uPD70F3584 (4437304633353834)
Start reading
Chip data reading(0.00%)
Chip data reading failed! Error code：12300010 This chip is read encrypted and cannot be read


In Autel I see functions ID Smart box reset and ESL reset. And synchronization. Is it enough or not?
Need I reset a new (used) smartbox before synchronization or not?

Thank you!

Attached Files

Thumbnail(s)
   

Good morning

I would like to virgin my ecu E6T01071 (pajero 3.2 did 2001)

if this is not possible make an immo off

THANKS

Attached Files

backup.rar

3

37.41 KB

Download

i'm seeking assistance to delete dpf, adblue and egr for this opel corsa 1.5 with bosch md1cs003 ecu

best regards

Attached Files

psa corsa fls ori.rar

13

4 MB

Download

Need a damos for Audi S4 2.7t b5
8d0907551c 0002
Thanks

THINKSCAN 689/ 689BT Full System Diagnostic Tool For All Cars, support Bi-Directional Controls ECU Coding, 34+ Services, FCA Autoauth.



Why You Need THINKSCAN 689/ 689BT?

1. Unprecedented processing speed. Cortex-A53 4-core chip(5X faster) + BT-WIRELESS + 8" screen

Cortex-A53 chip + doubled memory ensure 5X faster & smoother navigation than OBD2 scanner diagnostic tools in the same category. Larger screen (8 inches), higher screen resolution(1280*800).



$533 To Get One THINKSCAN 689 Full System Auto Diagnostic Tool>>>

For more details, feel free to leave your comments or send us a message.

Hello, I have a problem starting Volvo S40 2007 2.0 diesel engine: D4204T .The car does not start, no crankshaft revolutions (the rpm reading appears for 5 seconds and disappears, and after turning the ignition again the same, no change) The signal on the oscilloscope is still the same even when the diagnostic device shows 0 rpm.I replaced the shaft speed sensor with a new original one, I replaced the magnetic wheel with a Corteco (new) one, the installation is connected briefly from the shaft speed sensor to the engine controller, the engine controller was replaced with a used one. I connected all the engine equipment for the EGR DPF test, turbo alternator sensor, electric power steering, I thought that something was interfering with the sensor, but unfortunately without success.I am already helpless in the current situation because I do not know what else to cling to and check. The timing belt has also been checked for blockages.If anyone can give me some advice or suggest something I would be very grateful

Hi, is there any solution, as supplied from immobilizer, first ktag all with ST10F276 in archive, help to disable 10AS

Thanks

Attached Files

Land Rover Defender.rar

11

1.24 MB

Download

M24C02_028906021GK_0281001654_ORI

Thanks a lot!

Hello everyone. i need your help urgently
I have one Fiat Dcato 2011 with a damaged BCM 250 Magnetti Marrelli module, Mb91F465Pa processor, eeprom S64S / 25c640.
i need transfer immo data
Is there anyone who can modify the eeprom?

Attached Files

BCM LUIS.rar

3

1.72 KB

Download

Hey guys, so my S63 AMG is tuned and it is showing max 900NM in the ECU via xentry to the TCU, my TCU is also tuned to allow 1400NM of TQ, but i am trying to adjust the tune so the TQ in the ECU is 100 accurate so the gearbox works perfect. Someone told me to adjust MDNORM, but there is also 2-3 other maps that need adjustment so my TQ value in the ECU shows accurately to the TCU.

Any help where to start and what these maps mean ?

After several attempts I can't get any further and no connection to the vehicle has anyone who has an idea what the problem is

Hi, can anyone teach me how to do kilometer correction on motorcycles? What tools should i get, what softwares and where to get them etc etc

Looking for a cax file for EFI Live 2100a ECM. 

Anyone sharing?