Ford transit bcm BK2T 14B476 XX
Could some help me to locate eeprom on pcb or tell me where immo and key data is stored. I have full read of flash and data flash and want to just transfer immo data from donor bcm to another bcm to test some circuits with the intention of building a test bench rig. Thanks in advance
I had to reset the device to the factory settings after a failed update.
Since then, the device no longer displays a serial number and I can no longer start an update or a diagnosis.
In the “About” menu it shows:
Device name: CRP919E
Serial number:
In the “Version” menu it shows:
BOOT: unknown
DOWNLOAD: unknown
APP: V1.09_2.21
SYSTEM: YQ_V102_014
I have already tried without success:
- shut down the device to 100%
- Changed the network setting to another network
- other factory settings (via the menu)
- tried to reinstall the apks (there are videos on the internet showing how to get into the system and gain access to the file system)
Whatever I tried, it didn't work, when I check the files on the system, there is no firmware file for the
device to reinstall the firmware and there are no launch car brands (the device is empty).
Maybe someone with more knowledge can help me troubleshoot this.
Hello, I have an Iveco Daily year 2014 2.3 diesel in the workshop, a mechanic performed welding on the vehicle with battery terminals plugged in, I changed the BSI for another and canceled the immo in edc17c46 with starter relay and it starts fine but the dashboard gives me an engine temperature error and the lights flash, is it possible that the dashboard is broken? or bsi pairing?
rgds 2 All,
the patient is x253.915 with locked mrd 1.42 ecu from 21.11.2022 running in bootloader, so all sw is invalid
W1N2539151G034807
some workshop played with it because of adblue problem
so now need correct numbers for reprograming
mb part no: A6549009600
hw: 6549017600
boot sw: 6549041300
Hello! W212 2014 hu45 , languages Korean and English in menu, ECE languages required, coding to another language is reset to English after reset! who will tell me the solution? pn 2129009026 HW 2129018506 SW 2129023309
hello ive done a chip swap on this volvo but getting checksum error im wondering if some one can please checksum the eeprom file for me its a 95040 chip an ive attatched the file thanks in advance
Gents I need your help I have this Audi that would not start so I have removed the IMMO from the ECU and the car runs just fine but the Alarm gets engaged and the hazard lights turn on.
I have read the EEPROM from the Dashboard to check if VVDI2 has any option to deactivate the Alarm
Hello dear people, I needed your help, I read the file via mpps and a few people said that you can deactivate it via file. I ask for your help, I'm paying for it too, it just has to work
Hi
I have my old Nissan already 4 months ot starting. Many locksmiths try to clear fauls P1611 NATS malfunction but not successful.
I think is only possible only with Nissan Consult III NATS activated but I am not sure
By the way Nissan dealer said the software is to old and they can't help.
Can someone tell ne if worth to build my own kit Nissan Consult III NATS activated plus scanner,, or I am just loosing my time?
Can please someone help, please?
Really good car to scrap it.
It must be possible to flash over OBD, but I cannot seem to find anything that supports this ECU. There is a name brand tuner that you can buy just for this car
Hi, my brother have a kangoo 2019 and the problem with uch is wet.. . All Car is full wet. Many hours later, car is dry and i need revive
I buy a second hand uch with same reference BUT dont have immo code or cable to do this work
Car not cranck. With original uch, nothing happens on dashboard but, with second hand, dashboard light and not cranck. Only hear a relay
Autocom say, immo dont match and need learn new Keys. I have upa-usb and i try to read with it but I dont know how to do it.
Engine is full dry, i put a cable to starter direct and crank ok but dont start. Immo problem
Hello members ! Need help coding full led headlights for audi a8 4h facelift. Car was in a crash and someone sadly put full led headlights but car had matrix headlights. Does somebody know which modules need to be coded and maybe has codings from similar car. Car has acc, line assist, night vision. Thanks to everyone.
Hello. Maybe someone has a solution to change the run in the CALSONIC Kansei instruments inside Eeprom 95640. Native mileage 170527, a new mileage needs to be delivered 27000 km
Hi im needing a hand with a file for me fabia pd130 asz, its got a GTB2260VK (Audi) unit with BMW PWA Actuator, AL injectors, 4 BAR Map, MAF Delete, EGR Delete, ASZ Delete, Just really needing the actuator to work and get the limit points set, Ive a piper 272 cam to fit but not sure if i will need valve pockets cut or not? thanks
