Hi
I have been having an issue with my car not detecting my keys, I tried many things but nothing was working. The car is a 2013 535i xdrive and the only issue was the remote functions of the key were not working and also the comfort access
I read one post but I can't find it anymore that had the same issue than me and it fixed by updating the cas module so I decided to try. I downloaded ista and started the software update which had 57 update: I connected a power supply and everything was fine (except for the constant unknown terminal voltage warnings) up until it asked me to turn off the ignition and put the seat belt in the buckle
For some reason the ignition would not shut off i tried everything but the ignition stayed on so I pressed cancel and the it asked me to shut off terminal 15 for 10 sec and then turn it back on but I didn't know how do do it so I pressed ok; then the program was stuck on blue screen and again no way to shut off the ignition. At that time I had to go to work and let the battery died. I just came back and charged the battery now the screen is off and nothing happen when I press the ignition but again I can't turn off the lights rom the dash
I have no idea what to do; ista shows all the module red. The car is completely bricke
Thanks for reading the post
Please anyone can help me? I need to clone this Tcu on bench, but the old is totally damaged, no communication.
Unfortunately i haven't MB diag tools..
So if i read the second hand ecu dump, possible make the codings in the dump?
The Tcu nr is: A0034462410
Vin: WDD2452071J665925
Hello friend
I have MERCEDES w205 DSM. Original car DSM not have
I have second hand DSM.i want to virgin this dsm
If possible please pm or reply
I am ready to pay
Thank you
My backup camera stopped working, and I have replaced it with used one. Now the camera shows up while in reverse, but I don't see the yellow lines and it looks off.
Pressing to change wide view doesn't change anything. I got xentry hooked, but now I don't know how to proceed. Starting with the initial start up takes me to the login page. What should do here?
I'm looking for any of the Parker Iqan softwares if anyone is willing to share. I will pay for it also if it's not an outrageous price. It would really help.
I have a Foxwell NT510 Elite which I bought in March 2022. I had paid for Honda, Toyota and Volvo software support. My scanner was fully working but when I updated it to the latest version through FoxAssist (Jan 2025) it stopped working. Now, when I go to select Honda or Toyota, or Volvo it says "loading data" then shows a black screen and freezes and it does not respond to any key. I tried downgrading all software but I cannot downgrade Home and Common Text Library software. I am very unhappy because I had a fully working scanner and because of Foxwell "updates" I now have a bricked scanner! I contacted them and asked them to show me a way to downgrade all software or a way to reset it to factory settings (although I will lose my saved scans, but this is the least of my problems).
They suggested that I format the SD card and try updating it again. I did it but the problem remains and had no response from them for a week now.
I believe that I have to find an older version of the HOME software that is stored in the Home folder of the SD card.
If someone has an older HOME version than 2.04.003 (2.04.001 or even older) then I would appreciate it, if they could send the folder zipped to try to put it in my SD card and see if it works, as I need the scanner at my work and Foxwell are too slow.
Thanks in advance.
Anyone know what happened to VAG Immo Calculator from ecuserwis.pl ? The software is no longer on their website nor in any of their distributors. Where to download the latest version of the software? Do they still provide licenses for the software functions?
is here somebody who can make the EEPROM Fix for the DTC P0005 for Vivaro 2015?
Car has too high fuel pressure
Found nobody in other Threads who offer the service.
Hello. I want to buy original SW for editing maps in ECU, which one would you recommend, ideally one main license and one sublicense. Can you recommend me, maybe Winols (mappack from stagex) or ecm titanium, or swiftec?
Hello everyone, please can someone give me the file for this Ibiza? I'm more crazy with the original key, sometimes it works, sometimes it doesn't because the locksmith put the key in without anyone and now I need to somehow make a Flash, I got this through vagtacho
"Hello, while making a new key for the BMW CAS3, I think the CAS3 crashed. I'm trying to communicate, but the FIN number is not showing, and when I insert the working key into the ignition, there is no reaction. Who can fix the CAS3 file for me? Thank you very much."
Hello
can someone help me sync EDC 16C34 from Volvo S40 2006 with CEM 1L15Y with 2 MCU 9S12XDT384
ABS serial number is 000000204775
Thank you very much!
I just got an A6 C8 and i did a full scan and i found the error Component Protection Active on module A5.
I dont have any error on the dash whatsoever.
Any idea how to proceed. Do i have to have some feature restrictions?
I need help with adjusting milleage of Toyota FJ Cruiser 2007 with EEPROM 93c66 dash type 83800-35G20-B. This car is from USA and its milleage is in miles but not in km. I have tried many solutions like Tacho soft and x-tool dash calculator, but they do not seem to work dash starts to flash after writing the modified files.
Current milleage is 249453 eeprom read as 16bit
If I write back the original file dash stops blinking and all works fine.
Tacho soft and other tools suggest editing the following 3 lines in the beginning of the eeprom(which does not work already tested):
0000: FA 16 FA 16 FA 16 FA 16 FA 16 FA 16 FA 16 FA 16
0010: FA 16 FA 16 FA 16 FA 16 FA 16 FA 16 FA 16 FA 16
0020: FA 16 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0030: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0040: FF FF FF FF xx xx xx xx xx xx xx xx xx xx xx xx
where the next bytes:
FA 16 - is a mileage
But the original contents of the eeprom with milleage lines look differently I believe it is because the cluster is in MILES not in KM, please see:
