[font=Inter, "Inter Fallback", sans-serif]Can anyone help me with proper startup and configuration after replacing the regular RD45 radio with SMG Navi, with BSI configuration? I took off the dashboard, replaced the smeg set and added the VIN harness, and it no longer beeps. However, the blower regulation is not working properly, the 4th line is not working, the airbag is on and I have a stop switch error, but everything is fine. SOMEONE can help with configuration, for example? I have online passthru access to diagbox[/font]
For any mates on the forum having issues with their bmw´s EWS
I just wanna share my recent experience. Not sharing copyrighted solutions.
1st: after having a large search on the forum I´ve found some sites where I´ve become a member, offering solutions for immo/ews delete.
I think those will work on a lot of occasions, but it hasn't been my case.
2nd The actual Car is:
BMW E46 2.0D 150HP
MY 2006
BOSCH HARDWARE 0281010565
HARDWARE IS: DDE5_M47 Equal to EDC16C31 BMW Version.
SOFWARE: 1037361858
SW UPGRADE: 07794288 (May differ in your ECU)
Microprocessor: MPC556LF8MZP40 (It may also be an MPC555...)
EXTERNAL FLASH: AM29BL802CB (Maps Inside)
EEPROM: ST95320
3Rd. SOLUTION:
What I´ve come to finally see is both ***MAPS on External Flash and Microprocessor need to be modified***
in order you can **disconnect your EWS Unit** &
*Rewiring your Starter line fuse protected*, Star the car without a Chip on you key case.
In my case I had first a complete KTAG Backup.
Modifyed both MPC & FLS files checksum correction, EWS disconected, Starter line reconected And Go.
Just a Tip: When I first tryed reading with k+dcan cable (High Quality Bimmer Geeks Pro). Software could not read. Just Identify...
I can help modifying your DDE5_320D Engine Control Unit maps, so you can write back on bench with Ktag for example, or
you can do it yourself. EWS PATCHED File Available...
PW on PM after Thnks & Rep
I have these 2 files that need clearing, the 525 has crash data and the 901 has a b100 fault.
I went to use my ACK only to find its not working - no surprise there.
Tried a quick manual clear but they b100 901 is failing and the 525 gave me a module error so I got it wrong lol
Who can help me clone VL381F ?
I've attached ori and donor files.
I want to move immo in donor eeprom since adaptations are not working on original eeprom.
hello i have a problem with this meriva 1.3 Z13DTJ on ori file i have no dtc but glow plug flash, i reset all data in ecu, dpf effency 0% 0km sistituion, all adaptation done, after that write mod solution but glow plug still flashing with no dtc. i don't know what i can try, i use three different diagnostic kts texa and launch.
Opel Vin Number: W0L0XCE75A4135333
Opel Hardware Number: 55574587 RP
Marelli Hardware No: MAG 01246O2M06005
Marelli Sofware No: M06005
Engine Code: Z13DTJ
Programming Date: 28/01/2004
Hello, i have a ford galaxy mk2 2000, 2.3i petrol in the workshop. Is it possible to use a vw immo off emulator for this car? It has a valeo 73659512 immo unit under dashboard
Hi for all , Can anyone help me with the crash of this airbag unit from Alfa Mito Continental 50508413 53284388 mini 95320 .
I tried to delete the crash but it doesn’t work. Also tried with 2 more files from other person .
Same Problem
B0107-1B Front Passanger pretensioner circuit resistance above threshold.
I have already checked the connections betwen unit and plug and put a resistor always the same problem .
When i put a resistor in this pretensioner sometimes it low from 7 ohm to 4 ohm but not enough for airbag light off but when i put a resistor on other pretensioner it lows from 7 ohm to 2.5.
This car have 2 tensioners on both sides .
Anyone help me pls ? i pay no problem . if solve no problem ..
Hello dear friends,
Perhaps someone knows which tool can read (DTC) this chinese car BAW Warrior 2043, 2021 manufacture year (with installed DCM7.24 ECU)?
Thanks in advance!
hello guys anyone had success solving p0880 dtc in the ecm and gear stuck to 4th , any hint is appreciated , i checked all fuses and wire continuity from ecm to trans solenoids
the car is kia optima 2011 auto thank you
Hi guys, I need to disable EGR and DPF on this Renault Kadjar with SID310 ECU. A year ago they did a bad job and the car is having problems. The attached file is ORI.
Many thanks in advance.
Regards.
Hello, first of all, good work. I have been dealing with this vehicle for weeks. It is driving me crazy, there is no problem with the vehicle, it works, there is no problem with gear shifting. It only gives the error code p0559 after starting, and the screen shows an error as a transmission fault. Has anyone encountered this problem? Is there anyone who can remove this error code from the transmission control unit? I removed it, but this time it gives the error code U3FFF.
