i read RH850 R7F701404 and my real mileage is 84434km .
i need 40000km 
i attached D flash and flash dumps

Attached Files

R7F701404 read flash .rar

2

1.21 MB

Download

hello to all
anyone know a cheap j2534 that can work with 24v for trucks on xentry?
thanks a lot

Can someone do immo off with checksum corection for fiat punto ecu edc15C7 in flash 29f400. Thanks in advance

Attached Files

punto_fls_ori.rar

3

138.48 KB

Download

Hello, someone can help DPF off? thx

Attached Files

fca_marelli_8f3_obd_fullbackup_full_backup_20210215122842_int_flash.rar

9

661.53 KB

Download

Hello guys,

Have Mitsubishi ECU A 135 150 19 79 ECU
E6T42484  H3ZE 
Original one is damaged but I can read the original data with KTag.

Bought an used one. Can I clone the ECU and would this be enough to start the car with the used ECU or do I have leave the used ecu with his original data and do immo off?

Any one has experience with this job?

if any one can help me so I can upload both reading data.


Cheers!

Hello, I would also like a Dpf off audi a4 B7 2.0 tdi edc16u31. It doesn't work well with davinci, I also did it manually like this 7f ff 80 00 00 00 02 8f (01), I put 00 but it makes a lot of gray white smoke. If anyone has a better solution I would be very grateful, thank you very much!

Attached Files

flash orig.rar

5

336.51 KB

Download

Hello friends i need for my own car a strong stage2 with egr ,dpf,swirl off and some real good hardcut... and adjust the boostmap sensor too 3 bar because have replaced it with a 4bar sensor i have also a hybrid turbo installed..
i can pay for a good file , money is no problem ...file is important... but i can only pay after testing file because i have already buyed for this car and i got scammed.......
thanks you all

Attached Files

Audi A6 233HP 4F0910402E 381388.rar

5

82.06 KB

Download

hey, I'm having trouble reading Bosch CR3.13 ECU with KTAG. I've already tried an external source and nothing. always says there is no support for the hardware. Has anyone had this problem that I can rent? thanks

Hi everyone,

in my nissan primera p12, 2.2 dci from year 2004 secure message with green background appeared and radio with navigation system stopped working, however I am still able to use all other functions like rear view camera, climate control and so on. So far I tried checking all related fuses, tried disconnecting navigation DVD drive unit (located under drivers seat). When it is disconnected LCD screen does not turn on whatsoever and if I reconnect everything back then all seems to come back to normal (except the radio of ofcourse  ). 

Then I tried fiddling with AV unit's connectors thinking maybe corrosion would be present, but that was not the case. I disassembled both navi DVD drive and audio unit to check whether something got burnt inside but that also was not the case since everything inside was clean and did not raise any suspicions. After reconnecting everything back and letting the car do its thing with battery disconnected for more than 30 min the problem still persists and radio still does not work.

The whole thing started when the car was left in the driveway for a week without driving it. When I started it the alternator belt screamed awfully for few seconds (I have tightened it right after that). After short drive (with radio turned off) I noticed secure message on the screen. Interestingly enough, the day after that, when I got into the car no secure message was present and radio worked just fine for about 15 minutes. After that ALL radio controls including steering wheel buttons and radio off button stopped reacting, but music was still playing. Finally when I took the key out and reinserted it, secure message appeared and radio has not been working ever since.

In self diagnosis mode the center electronics module and audio module are marked yellow, while everything else is green. I am starting to lean towards software malfunction? Is it possible? I've been reading about the need to re-initialise NATS, since secure with green background means that either audio unit is faulty, comunication is bad (although wires seem to be intact, I will test them tomorrow since it's dark and cold outside) or the unit is not accepted by NATS. I do have access to nissan data scan II and read that lots of people succesfuly coded immo pin codes using it but is it the same as initialising audio system? Am I correct to think that main module (and the one called central unit in the self diagnosis menu) is the BCM itself? NDS II does have functions for BCM.

What would I need for reinitialisation of the system? As I understand, NATS pin code is required but I am still not able to find the code by BCM label. I attach the photo of my BCM, would be incredibly thankful if someone could decyper the pin code for me.

I also was forced to change the 6 disc cd changer since I broke my original one but as it is also coded to NATS, the new unit is not working ad it is disconnected ever since. Would this re-initialisation help to adapt this second hand unit to work?

I would really appreciate any ideas on how to bring radio back and how to remove that annoying secure message from my screen so thanks in advance for any help!

Attached Files

Thumbnail(s)
   

Hello everybody,
I tried a lot to tune a cf moto cforce 450 euro 5 with ecu mse6.0, the latest model with ecu positioned behind the passenger seat, not under seat but no success. I tried on three different atvs, all with exactly the same version F01R0ADG9A. The first two atvs is completely stock with stock cat. I tried a lot but whithout changes( no vmax increased, not decreased, for both vmax is 75 km/h, no fast acc, no stutter). But third atv has cat removed. Here the situation has changed. For this with cat removed but stock file, the vmax is 90 km/h. When I tried to tune the third atv, after many atempts, i succeeded to obtain more power( the throttle response is much faster and, acceeleration is improved) up to 70 km/h. After 70 km/h is worse than with stock file, and vmax is 80 km/h. With stock file max rpm is 7200 but with tune the max rpm is 6700. I also tried to do vmax off, but no changes.
If anyone did a good tune for this version i'm ready to pay.
I attached the read file.

Attached Files

cf450.rar

24

191.18 KB

Download

Hi,

need wiring diagram (2 fuse boxes inside) for Citroen C4 II Picasso 2017y 1.2 benzin.

VIN: VF73DHNYMHJ559056

Hello Everyone , i have an w205 from Korea With HU5s2 and i wanted to convert to Europe to install Maps , any suggestions how to do . 
I have DTS Monaco wanted to know what firmware to flash for europe

Attached Files

Thumbnail(s)
   

Thread deleted. 

BMW ISTA+ 4.45.21 (Rheingold ISTA-D 4.45.20)
Year/Release Date : 12.2023
Version : 4.45.20
System requirements : Windows 10 x64 or Windows 11 x64, >300 Gb
Interface language : English + Russian
Tablet : none
Description : ISTA-D 4.45.20
Languages ENG and RUS
SDP 4.45.21
Additional information : I bought files with a blocked generator from the Chinese for a client. I'm uploading them here so that if someone finds an open activator or removes protection from the files, they can share them in the thread. My activator no longer works due to system reinstallation
Installation method:
1) Unpack and place files in folders:
ISTA4.45.20 - C:\EC-APPS\
4.45.20dbs - C:\EC-APPS\ISTA\SQLiteDBs
4.45.20-SQLite-RU - C:\EC-APPS\ISTA\SQLiteDBs
PSdZData 4.45.21 Full - C:\EC-APPS\ISTA\PSdZ\data_swi\
Without programming files (PSdZData is not unpacked) - run diagnose_only_with_blp_x64.reg
With programming files (PSdZData is unpacked) - run full_sdp_blp_x64.reg
2) Go to the folder C:\EC-APPS\ISTA\TesterGUI\bin\Release and create a shortcut to the ISTAGUI.exe file on the desktop
3) Buy an activator from the Chinese


FREE!!! Torrent file.
 REP + Thanks for Password 
Please DM me after for password

Attached Files

BMW ISTA+ 4.45.21.rar

114

294 bytes

Download

Hi, i have a 2019 Seat Leon 1.5Tsi (engine code: DACA). In 1st and mainly 2nd gear, i get the juddering effect, when i change to 2nd gear there is also a flat spot and the rev counter bounces slightly and then it picks up speed. It’s a common issue on this engine, lots of people complaining about it, apparently there was a EVU Update, anyone know if that fixed the issue and if yes where i can download it from? I have Odis Engineering so can update the ecu. Thanks

Green Oak 2368K, ECM, Ford - PATS DISABLE

Just wondering if anyone has a HEX+a2l or anthing that defines the switch.

have it in HPT format can read with older HPT and make bin if needed

Attached Files

2010 Ford F-Series,Engine 5.4 V8 - Automatic_3062ori.hpt.zip

5

449.1 KB

Download

hey,
I need Immo Off for:

Citroen Jumpy
Bosch MA1.7
0 261 204 703

Can someone help me?
Thank you!

Attached Files

[email protected]

2

134 bytes

Download

Hi guys 

Anyone have ktag 2.70 to update protocolls 

Thanks

Translator



Translator



Hello,

can anyone make a Stage 1 on this B7 2.7tdi?

Thank´s

Attached Files

8E2997401H_8e0907401al-audi-a4-b7-2.7tdi.rar

4

69.61 KB

Download

Hi,
Car: BMW G30 hybrid 530e 2019.

During the BDC flashing, an error occurred (probably due to the Ethernet connection). After that, the car got stuck in ignition mode – lights on, display on (but no response). I tried to retry the flash, but without success. After 1 hour, I decided to disconnect the battery, and after that, the car does not respond to the start/stop button; the displays are black. I am able to connect, but I am unable to read the FA with ESYS 3.35. I am not able to call any function using ISTA(e.g. disable transport mode).

Do you think it is caused by energy mode transport/flash? I will try to set default energy mode using tool32 but on Monday.
I am looking for some advice.

During the flash retry, there is an error:

Hello. Does anyone have a generator or know a trusted site to generate the unlock code for this radio model? I changed it to another car and I don't have the code papers. thank you.

wrong post

Hello everybody Can someone sync isn from cas3 and mevd17.2.2 dme from mini cooper please

https://mega.nz/file/bDxkBRqb#kUoAMJkfZ_...gef0xGU4cg

Envoyé de mon 23117RA68G en utilisant Tapatalk

hello, 

i need an ablue off without reset for opel corsa please
ive got two file but the adlue light still here on dashboard

thank you

Attached Files

psa_bosch_md1cs003_tc298tp_bench_intflash_4000080c06401b211744362100000000_20241221102454.zip

5

2.29 MB

Download

Hello, I would like to fix heating up in my car. A4 B8 CGLC 03L906018KL
I heard that some tuners slow down egr pump and it works good. I tried it too and set the pump to 30% in the warm-up phase, but vcds always shows 60-70%.
Can you help me with that modification ? What do you think about that idea?

PIWIS TESTER 4 42.950.025 engineering for free
Windows 11
Enjoy!
PM me for password

Attached Files

link.txt

329

84 bytes

Download

Hello I have problem with Audi a6 c6, 
When it reaches 90 degrees
it starts cuts off power with different speed sometimes 90-100 km/h and sometimes 120-140km/h and it’s shaking when cutting of power 
There are no any faults 
Has anybody had similar problems?

Hello I have problem with Audi a6 c6, 
When it reaches 90 degrees
it starts cuts off power with different speed sometimes 90-100 km/h and sometimes 120-140km/h and it’s shaking when cutting of power 
There are no any faults 
Has anybody had similar problems?

with an opened mega link NO PASSWORD, but remember to give thanks and reputation for the share.

Attached Files

ELMConfig no password.rar

102

162 bytes

Download

Hello, i need for this car 03L906022QD_9977 dieselgate downgrade?
Someone can help me?
Thanks