Hello, I have a problem deactivating the start/stop function. There was an error in the engine control unit which I removed. Unfortunately the light in the instrument cluster remains on. Can someone please help me?
Operating system: Windows 11 (64 bit), Windows 10 (64 bit) Supported Hardware: UVIM Communication Interface High speed download link
Instant download after payment, no waiting
Trying to edit the value for maximum intake manifold pressure , no matter what I put it will not save a value above 100 , it will save values below that but not above . Downloaded a fresh xfd file , close and re open everything same problem , any suggestions sounds like a common problem ?
When I run Odis S or E It auto detects my vin but always asks me additional info like engine type. The problem is when I scroll down the list of options, my engine type is not listed (CATA) This is for a 2012 Audi Q7 vin #: WA1VMAFE7CD003066 What am I missing here? A project file? A datflash file?
I have a Kess V2 which works great, I've cloned on other MB with no issues every time. However I just got this 2011 GL350 and it's not able to ID the ECU let alone READ OR WRITE.
What am I missing here? Can someone please help me out. The GL has a deleted tune that I would like to save.
But when I try i get these error messages:
"Warning, unknown ECU.
For a correct procedure you must
send log files and reading to the
technical support. Proceed
anyway?"
And later if I proceed anyways I get:
"Generic ID error"
Hello, I read a 93c86 but believe it may be corrupted or such. When I write back the orignal bin or the new file they both make the cluster display KM. No menu settings are saved after vehicle restart either. Wrote a bin from another 93c86 and it works fine but of course not the eeprom needed. Attatched both files.
2020 Ford Expedition 8in Cluster
Original around 68300km/53000 miles
Cluster Part Number: LL1T-10849-FD
I would like to know if someone could repair the file or at least tell me if it is broken?
HP Tuners 5.1.58 Version
120$ unlimited keys 70$ one pc
🔧 SKIM OFF: Removes the SKIM security system, allowing the use of a new key without the need to reprogram the ECU. A perfect solution for repairs or upgrades!
🔑 VATS OFF: Disables the VATS (Vehicle Anti-Theft System) to prevent lockouts and failed starts, ensuring your vehicle starts reliably every time.
⚙️ Custom Reprogramming: Tune your vehicle's ECU to maximize horsepower, torque, and fuel efficiency. Personalize the air-fuel mixture, ignition timing, and much more—all at your fingertips!
🔥 Performance Enhancement: Gain complete control over engine management, optimizing throttle response, engine power, and fuel economy.
✅ Compatible with over 200 vehicles: HPTuners works with a wide range of cars, trucks, and vans, making it the perfect tool for any tuning enthusiast.
Work with internet and all vehicle support Jeep/GM/Dodge/Ford/Toyota/ETC
[font="MHH Font", Calibri, sans-serif]For any informations, write me in PM ![/font]
I need bmw Ista 4.50.40 no standalone just for my pc im willing to give xentry 09 2024 xpt, ford fdrs fjds, ids activation, tech advisor 2025, alldata and identifix or mitchell truck series 2025 access.
Hello Renault Master III 2.3dci 150hp edc17c11 replacement of the gearbox from automatic to manual has anyone reworked the topic and maybe help with coding?
I have a Toyota Aygo (My 2008) that start for 2sec then dies , There is not any dtc and I can connect with all ecus so I supposed that the problem is immo , I tried to resynch manual with sort obd pin3 with 14 without lack .
Could someone do virgin the dump from immo box ?
Thank you
Having trouble with this. Have ODIS installed, can connect to the car no problem. I have a new j518 immobiliser module installed and need to adapt and remove CP.
Wondering if this is still possible to DIY in 2025 with vas 5054a. I tried, but had trouble connecting to GEKO servers.
Hi, got a few fault codes after a scan, (please ignore the stored codes) and would like to know how to tackle them.
The one which needs immediate attention is P0C3100 as I suspect it’s throwing a yellow ‘malfunction’ message on the dash and affecting hv drive system.
I am selling my DERELEK USB-DIAG3, in excellent condition, very little use and working 100 %..600 e. shipping costs included to EUROPE.Only interested please.
Posted by: carzoft - 01-02-2025, 03:25 AM - Forum: Selling Box
- No Replies
hi im selling direct access to mitchell tech advisor directly from your cell phone, tablet or pc. you will have access to repair procedures, torques, parts numbers and pricing, car dimensions and more.
![[Image: Xhorse_XDMLBPGL_MLB_Tool_Solder_Free_Ada...1735090413]](https://cdn.shopify.com/s/files/1/0072/5424/5449/files/Xhorse_XDMLBPGL_MLB_Tool_Solder_Free_Adapter_Kit_8.jpg?v=1735090413)
