Hello guys I cant find EWS module on X5 E53 this is second E53 in few days that I cant find module
and it isn't in place that is shown in ISTA X5 e53 2002 EWS location ISTA says under steering wheel a pillar it isn't there and wiring is missing
I saw few videos on yt that show EWS in trunk near battery but it isn't there nor connector.
Checked glove box compartment isn't there either and it isn't in dme/egs box under hood.
Connected with im508 EWS is detected and read vin from it so it is somewhere in car
I have Grandland x (this car is same PSA peugeot 5008) 2020y,car after crash,now I have in engine ecu fault U180B 07 Collision detected and car wont start.How can I fix this error?
I try diagbox but not found this collision reset.this car is hybrid.
Hi guys i need original file for that ecu.
Customer bring is car like that. Car shows no DTC and the engine does not run normal.
Part number is 03l906018AN. CFHC 6779 1039S41729
I upload the file i read, maybe someone can reactivate the dtc's wich are deactivated.
One question, some edc17 ecu's have immo in flash. if i write a flash from another ecu to my ecu, do i have to do full immo off ?
I have tire pressure warning into cluster display and also in dash cic display FTM system error, I cant made initialization reset, because this option is "grey"
Coding options;
-Radio system (RDC_SAFETY)Temparature TPMS ....(DISSABLED)
-Radio system (RDC) Tire pressure control RDC.....(DISSABLED)
-Cluster;
-Tpms delete2 (RDC Alive)Alive monitoring for tire pressure control RDC...(DISSABLED)
-Tpms delete(RDC_DISP_SWITCH)Tpms delete....(DISSABLED)
-Tpms delete1(RDC_VERBAUT)Tire pressure control RDC installed...(DISSABLED)
-Tpms malfunction Warning,Showmalfunction when TPMS has a problem....(DISSABLED)
Are there any module has to be coded to dissabled, more?! I can't find the RDC module in the trunk right side under the carpet, nor under the car to unplug it!!
This car is EU car without tpms transmitters valves into the wheels, it uses dsc wheel sensors for tpms.
Is DSC/ESP module faulty to set this fault???
Countries covered: 39 European countries including Albania, Austria, Belgium, Bosnia and Herzegovina, France, Germany, Greece, Italy, Spain, UK, and others.
Western Europe: Fully digitized for better navigation across 8.3 million road kilometers.
Eastern Europe: Digitized for most countries except Albania, Bosnia and Herzegovina, Bulgaria, and Macedonia.
Digitization improvements: Significant updates for certain countries, e.g., Albania (+58%), Bosnia and Herzegovina (+65%), and Bulgaria (+8%).
Towns and Cities: Navigation available for more than 738,000 towns and cities.
Map Details:
House Numbers: Extensive coverage of house numbers, especially in central and northern Europe. Additional improvements in countries like the Czech Republic (+56%), Poland (+1%), and Slovakia (+47%).
Version: A 2016/2017 version that includes more precise data and digital mapping for roads, towns, and cities.
Total Road Kilometers: Over 8.3 million km covered across Europe.
Compatible Car Models:
BMW 1 Series (E81/E82/E87/E88) till 09/2009
BMW 3 Series (E90/E91/E92/E93) till 09/2009
BMW 5 Series (E60/E61) till 05/2010
BMW 6 Series (E63/E64) till 05/2010
BMW X5 (E70)
BMW X6 (E71)
Languages Supported:
Voice and information available in German, English, French, Italian, Dutch, Portuguese, and Spanish.
This map update seems to enhance the navigational capabilities significantly, particularly in terms of road digitization, house numbers, and extensive coverage for multiple European countries. The update is designed for older BMW vehicles with specific navigation systems, such as those with the SA 606 option, typically seen in models produced up to 2010.
Need it? Push buttons Rate (Reputation) and Thanks, PM for pass.
I have in my hands a 2010 OPEL MERIVA B 1.4. The ecu it has is a DELCO E83.
I have erased the DTC P1101 with the xdecoder tool and I need to correct the CHECKSUM, since none of my WinOLS distributions have the library of that ecu.
Can you help me? Thank you very much in advance and happy new year.
Looking for professional, high-quality chiptuning services? Tunehub Files has you covered!
We offer fast and reliable file services, with a guaranteed maximum return time of 30 minutes.
Our team of three calibrators, always available during opening hours, ensures precision and top-tier results.
Why Choose Us?
Expertise in high-power calibrations: Specialized in VAG, BMW, and Mercedes vehicles, including multiple 1000+ HP builds.
Join hundreds of satisfied clients who trust us for precise and tailored tuning solutions. Whether you need performance upgrades or advanced custom calibrations, we’ve got the skills and tools to deliver!
Contact us now and experience the difference in quality and expertise. 🚗💨
I want to get into tuning with files, can anyone help me out?
Which software is best for the tuning, I have read WinOLS is pretty good but I'm not too sure.
What software and hardware are you guys using to pull the files, and do they differ between make/model?
I currently have a built-in MAP sensor marked 038906051C and I need to change it to 03K906051. I need help changing the linearization in the EDC17CP14 controller to the appropriate one. Below is a backup of my input downloaded via KTAG.
hello guys I have problem with Jaguar xe form 2017y after diconnecting battery my keyless doesn't work I can only turn ignition on or start if I put a key near steering column there is place if something happen with keyless, anyone can help ? I read kvm module.
Hi,
I have Volvo XC60 with P31658440 / BOSCH 0285013939 that need crash data reset
On ori EEPROM, I have just crash and passenger seat belt errors. I read it with SMOK, made crash reset but it did not work. Tried to reset with OBDSTAR, still have crash faults, so I decided to get file from carprogonline, but after writing it I got all possible fault codes that I can't erase. Still has crash data, but after carprog faile I also have U3000- Internal module error.
Can anyone help with crash reset in that unit ?
can help me whith change km on 95640 eeprom on w166 cluster
original cluster is dead and when i take down from car i see he has canfilter
i need 285.000 please
Seeing if anyone knows what software would be capable of reading bcm eeprom in late model super dutys 2020+. with all the issues trying to use pats on fdrs lately its made the pcm pats module initializations difficult. Ive noticed avtokomander can do it. But you separately read ecm eeprom, then read bcm eeprom data thru obd, then it makes the changes. I can see what its doing. My question is what other tools are capable of r/w bcm eeprom?
I
Also wondering if this same concept would work on 19+ rams with cummins. to get the immo minicrypt keys from the bcm if someone has already lost them in the ecm. Ive had a ton of calls lately to help recover 2020+ trucks that got shit tuning and left immo keys wiped in ecm. The only software im aware of is Witech. And its such a headache. The PIN code from dealer, you have to get that, then it rolls every 12hrs, and that code only works for witech with the micropod, j2534 witech has to get the code thru the moparkeycode website. Ive been looking into just following thru with the NASTF cert. But i dont think this would be too difficult to do as long as you had the software to read it. once its wiped out of the ecm, those key codes still have to be in the bcm. I already know exactly where theyre located in the ecm, would just like to find the same info in the bcm.
Ive looked and it seems that Arbrites software or whatever has a Ford PATS setup. Seemed a bit more limited on the chrysler side. Has anyone used this?
