I need immo off, for this car. Key is lost. I have read flash file by obd plug with Kess, and test it several immo off solution from this forum, but with no luck. I understand, that there are 2 version of this EDC15C2, and with one can be done immo off only with flash file, and other with epprom file. This ecu, is with 3 plugs.
Hello, I have a T6 with DCC chassis. I'm getting two errors. The first error is missing basic settings. The second is my problem. This one says "End of tape programming" is missing. I tried it with ODIS, but unfortunately, it's missing. I then found instructions online on how to do it via VCDS. Unfortunately, that didn't work either. Then I bought a new, old control unit, and unfortunately, it's having the same problem. Can anyone help me? Do I need to reconfigure the control unit with VCP? Thanks in advance for your help.
I need help with Kangoo 2009 Airbag crash
I make clear crash but still got 1 error
DF001 Internal Memory Error
Can someone help me to clear this
ECU Continental Temic
8201 217 225
2840211407
eeprom 95160
Thanks
P.S
I need tested dump beacuse the car is far away from me
THANKS
Hello guys,
I have 2004 VW Tuoran (petrol) and I have had engine light on for over an year. Faul code is for NOx sensor. MOT passed with the light on, but I'd like to remove the error code.
Can someone please help me with this problem? I had hard time to find suitable USB/OBD cable to work with NefMoto flashing software. I'm looking for cost effective solution for annoying problem. New nox sensor is 300€ and up
If someone have disrect link for suitable cable, I could proceed to read the ECU.
hello, i have a vw mk7 year 2013 ,original key remote does not work . i tired to make a new remote key , everything programmed good but remotes still does not works.
tried many remotes but same problem
below i have attached error code
Someone can explain me what I am doing wrong while trying to program hli_fl176 ?
I took AED from the right side, and program it to the left side
Now the lamp is working, but still there is no turn signal, and it shows fault on temparture sensor and fan
I assume it's something tiny to change, can someone help what I need to do to solve it ?
Hello, could someone help me, I turned off adblue and nox, the car had a dtc error regarding communication with the nox sensor, which is why the engine light was on, after turning off adblue and nox, the light disappeared, but every now and then an adblue error appears on the display that it is impossible to start the car after 70 km, then it goes out after some time and lights up again, e.g. it is impossible to start after 150 km. I am uploading the original file and adblue nox off, thank you very much for your help.
Hello guys
i have a Seat Leon ST 5F with 221 Kw or 300 Hp that it was flood and after allot of work replacing the engine , fluids and some electrical component now i can try to start it but after one second it shuts off because the instrument cluster it was replaced to ,and now i have an Immo Problem . I only have Odis and VCDS and i dont know what to do . Does anybody have solution for it ? Thanks !
Hi I'm wondering if it's possible to disable adas completely it's in a 2013 VW golf that year is know to fail any advice even on a cheapish fix is appreciated 🙏
