Hi. Is it possibile to convert odometer in dash from miles to kilometers? I was able to convert through menu other units like mph to kmh, F to C. But from menu I can't change odometer from miles to kilometeres. How to do it? Is it eeprom job?
Hi, I own a Clio 197 which has developed a misfire.
It idles roughly and is hesitant on acceleration
I’ve changed the sparkplugs and cleaned the coils which were sat in water that had leaked past the seals, also I have changed the knock sensor. However, the misfire persists
I’ve just bought EOBD_facile as I like to build my knowledge and be able to diagnose at least some of my own car issues. So, I’m new to on board diagnostic so would appreciate any help.
The car is not displaying any warning lights and there are no error codes.
When running the software, a Comparison (to typical values I assume) throws up this message box
I decided to graph the O2 sensors, This is what I get. To my untrained eye the upstream oxygen sensor voltage look overly spiky in places
Hi guys, wondering if someone can share prep materials/questions for Medium/HD Truck Certification T1-T8
Or probably for RED Seal Truck and transport mechanic certification.
Will be extremely appreciate!
Hello. I normally work on vw/audi so please bear with me as Mercedes is all new to me.
My friend bought a crashed September 2008 c63 estate and decided to to facelift it from xenon to Bi-xenon form a 2011 c63.
We bought the lights,wings bumper bonnet/ Sam-f, head light switch, self levelling module (and rear door modules if their needed) all from the same car.
We’ve bought and fitted a kabelDAVIKO conversion loom.
We’ve fitted the sam-f and added the bridge wire so now the car will start.
I still have to mate the headlight wiring together form the adapter loom to the car loom.
At the moment i only have the left side light working and that’s it.
Is there any other wiring I need to to before I call a guy for the coding side of things?
I have a problem with my Tesla S 85D 2016. The problem is the suspension, the rear suspension goes up and the front goes down. I replaced all the sensors but I still have the problem. Can anyone help?
Hi!
I have there motohours counter CURTIS from CAT
Inside is secured HC908LJ12
I try skip security with Orange, but without success.
Know anybody SS for this model?
Hello friends, does anyone have the wiring diagram for the BMW X6 2008 VTG module? I didn't find any in haynes, I'm interested in the power inputs terminal 30 and terminal 30G, if you have the complex diagram it would help me, thank you.
Hey there community I have following problem. I got from a car dealer customer a Renault Twingo 3 with no start problem. This car had only one key without fob and he wanted to make a second with fob. I did a backup of the uch flash data and eeprom and tried with renolink to learn a new key. After that the car won't start with either key. I tried with renolink support to do this but because of time zone differences it is a bit difficult. Is there here anybody who can help on this matter. Provide assistance in relearning the key. Of course I will provide payment as the car should be sold as customer is car dealer.
Hello everyone, I have a problem with a BMW f10 520d. The car's rear diff has been replaced but it has a different ratio than the original. Now there are two errors from the gearbox 421474 and 420611. Has anyone done this before and can advise what to do. Is there an option to code the differential ratio in the gearbox? Maybe these two errors can be removed from the map? Thank you
Hello,
who can give me the following address in 8bit in the attached dataset?
Unfortunately I am missing a Damos and I cannot assign the addresses:
SSwtS_Val.DStgy_swtDStgyOff_C
SSwtS_Val.SCRCtl_swtDSCtlOff_C
SSwtS_Val.SCR_swtSCRDEOff_C
SSwtS_Val.SCR_swtUDosVlvOff_C
Or I'll also take a Damos if anyone has it.
Thanks in advance
![[Image: STFTB1S2.png]](https://i.postimg.cc/hG17fbpF/STFTB1S2.png)
![[Image: O2-Volts-Up-Down.png]](https://i.postimg.cc/tCrZNXxs/O2-Volts-Up-Down.png)
