Hi,
i received injectors after refurbish, and i get table like this
Test # IPM PRESS ET Q T. Q MTR T. MTR Tmin T Tmax Result
1 1350 1400 1100 70±7 48.3 415±100 379 35 41.0 55 OK
i need help decoding what some columns means
i assume that:
IPM - pulses per minute?
Press-Pressure [bar]
ET- injection pulse time [us]??
Q T- target quantity [mm3]
Q- actual quantity [mm3]
MTR T. - ??
MTR - ??
Tmin - minimal fuel temperature [deg C]?
T- actual fuel temperature [deg C]?
Tmax maximal fuel temperature [deg C]?
printout looks like ditex eragon suite(not sure about it but i couldn't find anything more)
Today a Sprinter brought in the workshop. Won,t crank. Diagnosed the car with Xentry. Only faultcode is p3006b1 starter malfunction. As i try to start the engine with xentry connected, and i read out all the values it says that they are okay. But it won't crank.
I,ve got a start signal out of the cdi, all the way to the fuse/relay box in the passengers side.
But it doesn,t come out of the fuse/relay box. There are some relays on that box for starting the engine.
Is there someone who could provide me the wiring diagram, i haven't got wis.
Hi. Can anyone assist on this? I have got most of what I need just need to clarify a few things if anyone has good knowledge and willing to pm me. thanks.
Hi I need clear crash data from peugeot 508 nr. sensor 96 751 270 80. Continental i tried ecuvonix solution but not work. Eeprom 95640 dump read upa usb.
Can someone assist me with TCU flash file.
I have inncorrect software after replacing it with used one. 4H1927158AC Hardware part number OBK927156K Hardware version H08
2011 Audi A8 4.2
Soooooooo, I think I have a CAN bus (Hi Speed) issue here, but would like a little bit of help or maybe just a point in the right direction to fix this, my friend changed a tappet cover and the crank seal, car started up and died, here is the full VCDS scan...
Thank you for your time!..
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 22.9.0.0
Data version: 20220830 DS341.0 www.Ross-Tech.com
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:. 8T0-907-468.clb
Part No SW: 8T0 907 468 AD HW: 8T0 907 468 K
Component: GW-BEM 4CAN-M H09 0117
Revision: EC000056 Serial number: 5600E1162982D5
Coding: 00C303
Shop #: WSC 06325 000 00000
VCID: 03053A0B821511955E-8056
Subsystem 1 - Part No SW: 8K0 915 181 E HW: 8K0 915 181 E
Component: J367-BDM H07 0170
Serial number: 1102A110180711
15 Faults Found:
00456 - Control Module for Access and Start Control (J518)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 3
Reset counter: 229
Mileage: 99114 km
Time Indication: 0
Date: 2024.12.30
Time: 00:00:02
Freeze Frame:
Bin. Bits: 10000
Voltage: 12.20 V
Count: 7
Bin. Bits: 10000
Time: 1.90 s
01330 - Central Control Module for Central Convenience (J393)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 3
Reset counter: 229
Mileage: 99114 km
Time Indication: 0
Date: 2024.12.30
Time: 00:00:02
Freeze Frame:
Bin. Bits: 10000
Voltage: 12.20 V
Count: 7
Bin. Bits: 10000
Time: 1.90 s
00473 - Control Module for Elect. Park/Hand Brake (J540)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 2
Reset counter: 14
Mileage: 99114 km
Time Indication: 0
Date: 2024.12.30
Time: 00:00:00
Freeze Frame:
Bin. Bits: 00000
Voltage: 11.80 V
Count: 7
Bin. Bits: 10000
Time: 0.40 s
00457 - Central Electronics Control Module / BCM (J519)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 2
Reset counter: 14
Mileage: 99114 km
Time Indication: 0
Date: 2025.01.06
Time: 00:00:01
Freeze Frame:
Bin. Bits: 00000
Voltage: 11.50 V
Count: 7
Bin. Bits: 10000
Time: 0.90 s
01317 - Control Module in Instrument Cluster (J285)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 14
Mileage: 99114 km
Time Indication: 0
Date: 2025.01.06
Time: 00:45:52
Freeze Frame:
Bin. Bits: 10000
Voltage: 11.60 V
Count: 10
Bin. Bits: 10000
Time: 25.40 s
01316 - ABS Control Module
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 14
Mileage: 99114 km
Time Indication: 0
Date: 2025.01.06
Time: 00:45:52
Freeze Frame:
Bin. Bits: 10000
Voltage: 11.60 V
Count: 10
Bin. Bits: 10000
Time: 25.40 s
01331 - Door Control Module; Driver Side (J386)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 14
Mileage: 99114 km
Time Indication: 0
Date: 2025.01.06
Time: 00:45:52
Freeze Frame:
Bin. Bits: 10000
Voltage: 11.50 V
Count: 10
Bin. Bits: 10000
Time: 25.40 s
01320 - Control Module for Climatronic (J255)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 14
Mileage: 99114 km
Time Indication: 0
Date: 2025.01.06
Time: 00:45:52
Freeze Frame:
Bin. Bits: 10000
Voltage: 11.50 V
Count: 10
Bin. Bits: 10000
Time: 25.40 s
01332 - Door Control Module; Passenger Side (J387)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 14
Mileage: 99114 km
Time Indication: 0
Date: 2025.01.06
Time: 00:45:52
Freeze Frame:
Bin. Bits: 10000
Voltage: 11.50 V
Count: 10
Bin. Bits: 10000
Time: 25.40 s
01334 - Door Control Module; Rear Right (J389)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 14
Mileage: 99114 km
Time Indication: 0
Date: 2025.01.06
Time: 00:45:52
Freeze Frame:
Bin. Bits: 10000
Voltage: 11.50 V
Count: 10
Bin. Bits: 10000
Time: 25.40 s
01333 - Door Control Module; Rear Left (J388)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 14
Mileage: 99114 km
Time Indication: 0
Date: 2025.01.06
Time: 00:45:52
Freeze Frame:
Bin. Bits: 10000
Voltage: 11.50 V
Count: 10
Bin. Bits: 10000
Time: 25.40 s
01336 - Company Data Bus for Comfort System
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 1
Fault Frequency: 1
Reset counter: 14
Mileage: 99114 km
Time Indication: 0
Date: 2025.01.06
Time: 00:45:52
i have instal Xentry 05.2014 Acronis in laptop dell D630 succes
i have instal driver
configure port com
but after installtion MB star C3 can not to PC
how can i do to fixe it
pictures in attachement
please help
This is the software that comes with this OBD2 Bluetooth Interface, OBD2 Scanner, Renault Can Clip Replacement, ECU/Key Programmer, Best for Renault COM
and depending on the option you choose you can use it on PEUGEOT or RENAULT/DACIA. To do this you only have to indicate it and the seller will send you a code that is valid for the option of the brand you want.
Conclusion:
This interface works perfectly with the SuperScan Manager software that they provide you and its operation is very simple, since you can modify, consult, reset service etc.
It is Bluetooth and the first thing we notice is that when you open the program it shows you a list of car brands and a box for you to enter the code that it provides you according to the PEUGEOT or RENAULT/DACIA brand. This is where I want to emphasize... on the internet there are codes for all the brands that this program includes, but... as I say it ONLY works with the chosen brand because if you try it on another brand and even if you have the code it will tell you that it has failed because "the security key is incorrect"
[font="TT Norms Pro", "Open Sans", Roboto, Arial, Helvetica, sans-serif, SimSun]Asi que desinstale y borre el registro del programa, lo instale nuevamente e introduje el codigo de Mercedes, me salio ya disponible en el desplegable de las marcas, y como dije anteriormente NO FUNCIONA.[/font]
So I uninstalled and unregistered the program, reinstalled it and entered the Mercedes code, it appeared available in the brands drop down menu, and as I said before, IT DOES NOT WORK.
Hi need your opinion , what is eorng in this file ?
i have done for this car dpf and egr off .
i make this solution for a lot of cars and it works , but for now dont work, car make a regeneration .
what is bad ?
Ford transit 2.2 diesel MT 2009
ECU visteon DCU209
i attach bot files ori and mod , just tell me what is wrong ? what i make wrong ? its a swiftec solution .
the Problem is , the Car bacame an ECU update, after that someone flashed the ECU file before obd via obd with mpps.
but he also read the new update file via obd with mpps
after flash the old sw the car dont start and says Gearbox Error in display
i do a full BDM backup und just reflashed the update file as Flash
Can someone help me with this ECU EGR and DPF OFF?
I had this file processed with online service, but with this file no more communication and no start.
When I write back the ORI file I have communication and car starts so something must be wrong.
All help appreciated!
I attached both the original file and the mod file that does not work.
Hi need some help advice done akl on audi a3 2018 mqb virtual cocpit. With akl from vag commands, immo file ( all key are ffffffff) and sync file present i managed to add key and start car keyless function works but remote not working beacause can not extract data from virtual on arm cpu. Questions is will ill be able to add this key by odis to (its not OEM) in order to add function of remote or do i need to order new key from dealer.
![[Image: Screenshot-4.jpg]](https://i.ibb.co/kQVx6F1/Screenshot-4.jpg)
![[Image: Screenshot-1.jpg]](https://i.ibb.co/d23fTsX/Screenshot-1.jpg)
![[Image: Screenshot-3.jpg]](https://i.ibb.co/Q70dn2P/Screenshot-3.jpg)
