I am looking to modify the ccf file of evoque in order to activate some features. The evoque is 2021 model and its MY2022 system. I already have bmw enet cable so this is my base.
I already know that jet pro master works for my case but the software is too expensive to be used only for my car andthe demo works only for 3 days.
So i am thinking to buy Land rover software but is not pretty clear to me what software i need for my car (ccf editor - pathfinder - sdd - topix what version etc) and if those software works with enet cable.
Ecu locked cannot erase codes. Crank but no start. Maybe someone change ECU before. Car from Mobile.de
BCM and Key works i Can close and open car Remotely.
If i make a Virgin ECU how to adopt to the Car? What Tool?
Thanks
ECU is: DCM6.2C
BCM: BCM250I.08 (1389975080)
In short, I posted about this before but haven’t received clear instructions. In the middle of a flash update for a 2015 Hyundai with J2534 it stopped programming. Vehicle won’t start or identify VIN. How can I replace the flash? I just ordered a DC706 with MP100. Can this update the flash? If not what equipment can replace the flash? Can the DC706 save data to email?
Hi, can anyone advise me on a Scenic 3 k9k that does not charge the alternator, it has a new alternator and check the cable to the UPC, I have checked the fuses and I am thinking it is a UPC problem, I have tried one from the junkyard but it did not start, it was another reference, maybe that is why, I have renolink in case it helps, thanks
I need to virginize the F20 basic instrument cluster. I read the 160DOWQ chip and only found one short vin number. Are there any vin numbers anywhere else? The red dot is and remains after removing the J044109 short vin by replacing it with FF. The instrument cluster is coded correctly with esys. The instrument cluster has less kilometers than the car. Should the bin file of the 1-series basic instrument cluster 160DOWQ chip look like that? The chip is read with Yanhua Mini ACDP 2.
I have used key 4G0959754K PCF7945AC board 233.453.211-02 868MHz I try renew with vvdi mini key tool,select in menu 4G0959754K,renew proccess success,but after procedure key not detected.
Then I try select in menu IMMO 5th Generation Key For all immo 5th Generation Key.After procedure key detected ok,key brand new,not learned,but key code is 8T0959754C 315MHz Audi B8,this is normal?I can programming this key on C7?Why not work 4G0959754K function on mini key tool?
Hi! My temp gague in my instrument cluster is broken. Have to replace the cluster unfortunately.
What tools do I need to clone the cluster? Have done some ecus. But not clusters. Is it only vcds I need or can I do it in bench mode?
Hi all Guys... I have a Mercedes Actros with mcm2 engine control unit and acm3 adblue control unit. For correct exclusion of AdBlue, both the engine and AdBlue ecu must be modified. Unfortunately Flex Magic Motorsport reads the mcm2 engine but does not read the adblue acm3 because it is not supported.
Do you know of any tool that reads it or of a valid emulator that can be installed?
I would like to ask for help! How to change the mileage in the ECU/ MJD9DF HW002/. Currently 427?55 km. I would like 234621 km. I would like to reduce the service data proportionally. Thanks
Hello I am looking for someone who can explain to me how to modify the Km with a calculator cluster. It does not work Free
Peugeot Expert 2022.
Cluster
The original mileage is 17,257 km
Need 10,000 km or 20,000 km...
HI ALL.
I AM CONSIDERING BUYING FORD FDRS FOR DOING ADBLUE RESETS ON LATE FORD VEHICLE WITH SID 212 ECUS THAT ARE BECOMING QUITE REGULAR NOWADAYS..
WHAT IS THE PROCESS TO GET UP AND RUNNING? DO I NEED TO BUY ORIGINAL LICENCE AND SOFTWARE OR IS THERE A CHEAPER ALTERNAIVE ??
I HAVE SVCI INTERFACE, WILL THIS BE OK WITH SOFTWARE ? OR IS THERE AN ALTERNATIVE DIAG TOOL I CAN BUY THAT WILL ALLOW THESE RESETS FROM NON START ON THESE NEW FORDS ? MANY THANKS FOR ANY HELP
Hi
I have a 2015 Fendt 828 280hp with EDC17CV52 which comms crashed during injector reset procedure with a diagnostic tool. After that no more OBD communications. Flex managed to read the ecu content with bench setup. The ecu sticker is gone so I cant tell you the ecu hardware codes.
Maybe there is someone can check the backup file and give some ointers how to get the OBD comm back?
Maybe someone has the original file for this?
Also I know that the DPF and Adblue has been deleted in the file someyears ago.
Thanks for any advise
Flex bench backup file attached.
I've spent the last 5 months with my RRS off the road as a locksmith bricked my original BCM when trying to code a new key to it, I've since had the module sent away for testing it came back not fixed staying there was an immobilisation issue and that the BCM had no coma.... I've been racking my brains trying to think of a way to be able to sort my issue so I went out and bought an Ecu, bcm, key fob all from a wrecking RRS. I was wondering if anyone would be able to guide me in the right direction . Will i be able to change the vin on the second-hand bcm I purchased so that it matches the vin of all my current modules using SDD or is that not possible? I really appreciate any help that I can get with this one.
[2024-7] JUNGHEINRICH JETI SH (v4.37) EN9 FORKLIFT SERVICE INFORMATION
Quote:Installation 1pcs: $100
Quote:Installation in Multiple PCS: Send PM
Size: 10.12 GB Region: All regions Interface Languages: English, Hungarian, Dutch, Danish, Spanish, Italian, German, Dutch, Norwegian, Polish, Russian, French, Czech, Swedish Database Languages: Only EN Version: v4.37_EN Updated EN01- EN9 2024.07 OS: Window 10 and Win11 recommended
JUNGHEINRICH JETI SH 4.37 contains full technical service information, repair and service instructions, detailed schematics and circuits, intended for forklifts Jungheinrich.
Electronic program includes a search function and clear information about the products JUNGHEINRICH, these manuals help you to identify existing and potential problems, perform maintenance and repair forklifts JUNGHEINRICH. Also, service manual JUNGHEINRICH helps the user to get a detailed description with drawings of all systems, using which the user can determine the installation location and other details.
hello i need immo off edc17c42renault
its renault master3 2.3dci, its wont start because of immobilizer reader broken and i cant find one here in morocco
Hi,
My e87 123d is equipped with Webasto as independant heater(has its own circ pump).
We managed to get webasto tested with Webasto thermo test software and heater works.
THe car probably was coded before and webasto removed as there was no option in CIC screen to enable it.
I got it coded and option appeared but it gives errors in Ihka:
E72A message error: status water valve 0x3B5) receiver integrated automatic heating / air conditioning
9CA8 IHKA: system - related shutdown of auxiliary heater
I also checked VO with NCS expert and couldnt find vo for heater so added 536 as found this somewhere online.
Also tried to add 539 as it has remote for webasto but got another error in ncs expert
Unvalid mark -1
Unvalid mark -2 $539
Please help me get it working I suspect it is coded wrong as it should have VO for independant heater, but doesnth.
Heater is webasto thermo top V
Free download - no password - keygen included - thanks & rep appreciated
Multiecuscan is diagnostic software for hobbyists and the
workshop. In conjunction with the appropriate hardware, you can
carry out extensive diagnostics on your vehicle. Multiecuscan is
compatible for Alfa Romeo, Fiat, Lancia and Jeep.
- Software supports the following USB interfaces: OBDLink SX,
CANtieCar, ELM327 min.1.3a, OBD-Protect, OBD-Direct, OBDKey,
KL K609, Stardiag Can327
- Software supports the following Bluetooth / Wlan interfaces:
OBDLink LX / MX, CANtieCar, OBDKey, Stardiag CAN327
- Access to many different control units in your vehicle.
- Reading and deleting fault memory.
- Display actual time data in tables and graphs.
- Perform actuator test.
- Make settings (proxy alignment).
- Reading of static data (ECU ID, system status, error codes).
- Perform service / oil reset.
- Saving and evaluating data.
- Software available in German, English and many other languages.
- The software is available in three different versions: PC
version, iOS, multiplexer version.
- Software PC requirement: Min. 1.5GHZ with 1GB RAM. Operating
systems Windows XP, Windows Vista, Windows 7 (32/64), Windows 8,
Windows 10 are supported. Net.Framework 3.5 must be installed.
