HELLO!
I HAVE PROBLEM WITH NAVIGATION APS NTG FOR MERCEDES W209.
THE NAVIGATION LIGHTS AND IS ONLY THE LOGO MERCEDES.
AFTER A FEW SECONDS GOES OUT.
THE PROBLEM IS THE NAVIGATOR.
I ATTACHED PHOTO NAVIGATOR.
SOMEONE HAS FIXED THIS NAVIGATION SYSTEM?
IS POSSIBLE MAKE A HARD REST BY BUTTONS OR AN UPGRADE FIRMWARE FROM CD?
PLEASE HELP ME.
GREETINGS
GIASAP80

Hi all,

I'd like to extract ISN number from MS45 flash dump but don't find any information about its address. Anyone can help me? By the way, how to make it immo off?

Thanks a lot.

Attached Files

ms45.rar

126

459.01 KB

Download

Hi all

Does anyone know a working solution for resetting or reading out the data from MB's 722.9 7G Tronic ETC units? The one I can experiment with has a MPC555 processor inside, so it's probably made before 2008 I think. I'm interested in any kind of ideas...but solutions for reading via can-bus would be better. Has anyone done this before?
Or does anyone know how to reset the ETC with Star? I have dev mode, looked around in sim already...there are a few options for messing around with the eeprom, but I don't want to mess up an actual working car with this.
There is also a documentation for this type of ETC that I've found on DK, I'll attach it in case it helps anyone.
Thanks for any help in advance.

Is any one has experience with Nissan Consult-3 plus made in China, especially with ECU Reprogramming ?
Or a good source for original unit with a good price.

Hello

i buy kts 550 bosch and i work on esi good
But i will work kts with piwis v34 in this forum fimware can not be change with soft bosch(port com could be opened) i plug with rs232 cable and select COM1 i have native port i test in 2 machine and have already error...
I test to update firmware direcly on vmware piwis and firmware not change its normal?
regards

HELP!
I NEED DAMP IMMO OFF FOR OPEL CORSA 1999. MOT:1.2 16V ECU BOSCH 0261204475 HIBRID (I THINK THIS IS M1.5.5 ?)

THANKS !!

hi guys, i see the program tachoft 23.1 in site. anyone have this program running smoothly?

hi guys , please i need a radio code of an honda pilot 2003 , the serial of radio car is 110398 , thanks
Best regards

Hello
I need help.
I've got an old Autocom adp124.
I've tried to see if it works with the software but does not work Adp186.
I need someone to tell me where I can get the software adp124.exe in version 1.3 which is the one that works with this model.

Thanks for the help friends

I got jaguar x type 2.0 diesel 05reg. replace engine with tested and working one from mondeo 04reg.

reprogram injectors (belonging to ford) and looks like the new codes are saved in the car computer (ecu....). The engine don't start although fuel got pressure on rail. Engine sound like no fuel through injectors.

I use very old kts 670 with 2011 software.

Any hints please?
Thx.

Hello!

I will redefine my question a bit.

I bought this cable http://www.dhgate.com/vag11-11-com-hex-v...b153e.html.

I'm using the software that was supplied, VCDS 11.11. However when I try to use it it scans but after a few codes it say: Unlicensed Version.

I've search the forum for guides or help but I guess I don't know what to search for. If you don't want to respond please atleast give me a link to a thread that could help me

I have never started the application with internet activated. But I have used internet when the application has been closed (I disabled auto updates). Could that be the problem?

I've read something about firmware updates, is it possible to update firmware on my cable or did I bought the wrong one?

Thank you in advance.

    Does anyone have a very good solution for installation?

PLEASE help me which version of Windows you use the installation to 06-2004 DAS, expecting other ideas from you. THANK YOU

Attached Files

sd+wis 06.2004.txt

72

3.45 KB

Download

VAG ETOS,if anyone can help, that procedures to install or is this program is outdated

best regards

Hello forum, does anybody happen to have the installation files for the nexiq j17/19 etc.. or know where i can find them? i lost my cd and never made a backup Any help is greatly appreciated. thank you and good day to all.

Hí people, I find this : http://www.google.com.br/url?sa=t&rct=j&...s88kgTLMTw

It is good , support for ELM327 , VAG KKL , .............

Sorry, shareware version.
Some help to install ?
thanks.

Hello
HiCOM is diagnostic tool for Hyndai and Kia vehicles. It supports all OBD2 compliant vehicles since 1996-2013
Our OBD2 to USB HiCOM interface contains 10 multiplexed ISO9141 K-Lines, high-speed CAN-BUS and analog measurement circuits. Supported protocols include ISO15765, KWP2000 and ISO9141.
For immobilizer programming we provide SMATRA pin code service.
this is my upgrade for all free!
new version 0.1.4545, Dec 23 2013
Pass in pm
Do not forget Thanks
enjoy!

Attached Files

HiComSetup.rar

549

3.94 MB

Download

Links for WiTECH Desktop Software V13.02.34 - 10/2012

Works with :

VCI Pod


StarMobile


Vector CANCard XL.


Enjoy!

Relase Notes : wiTECH_13 02_34_Release_Notes.pdf

Attached Files

Links_Multiuplad_wiTECH_13.02.34.txt

236

112 bytes

Download

Links_Rapidshare_wiTECH_13.02.34.txt

241

199 bytes

Download

Hello,

I have a little problem with autocom.
I can install the software. When I will connect the cable with the software it gives a fault like this:
Software-number of ADP: Not loaded
What could be the problem and how can I fixed it?

Who can help me...?

Hey everyone, trying to install new key fobs using Volvo Vida with the Dice hardware... When i try to download the file it just says initalied!! Can someone help me? Is it not seeing the volvo server?
thank you

I am thinking of upgrading to Windows 8, has anyone successfully run ETKA or ELSAWin on the new operating system?


Thanks

Hy all! : Kolo:

Please help me! : Sadsmile:

I bought a factory radio. I built in to the radio in the car. I programmed with TECH 2 tool, because I wanted to program the radio to work together with the dashboard information display. But unfortunately failed programming. Posted by mistake! (34 or 95 errors). Does anyone have any ideas on how to be good in programming? Why not let? : Sadsmile:

Thank you in advance for your help. : Smile:


Car Type:

Opel
Model: Corsa C
Year: 2004
Engine code: Z12XE

Radio Type:
Siemens VDO - CDR 2500 (Factory Radio)

Hello mate's , i'm looking for this soft full Egr Pro Remover 1.5 .
please i have tryed with old version 1.4.4 but it's not Good .
Thx for all memebers for whole who intersting this subject!!!!!

Hi everyone, I have a customer with a 09 lexus es 350 they lost there master key and have only one sub key. Techstream will not let me add a key without the master key. I tried the all keys lost function but it wants a tis password. I thought i remembered the earlier version 4 not needing a pass so i down graded but it still asks for a pass. Any know solutions? Thanks in advance

Hello friends, i have upgrade my autocom tester version 2011-3, with new version 2012-2.
My diagnosis works well with the new version, and it connects with the machine. But the problem is the error "VCI not FOUND". This error was not with the old 2011 version.
I tried to delete the two folders "AUTOCOM" and disconnect the internet, but the problem remains. I also tried reinstalling the software, but I have not solved.
Does anyone have another solution to solve?

xxxxx

Hi All

I have Berlingo 2006 1.6 Hdi Bosch EDC 16.

Then vehicle has a speed limit set at 70 MPH.

I tried to adjust speed limit in BSI. There is no option to set limit in Engine.

What is the way to get rid of the speed limit?

Thanks

Willow

have installed scarymistake's http://mhhauto.com/Thread-Peugeot-and-ci...re-09-2011 and the peugeot doc backup working ok but cannot get the sedre backup wiring diagrams for diagnostics to work the white icon is on the bottom of screen and it comes up with click to open window message ,but noting opens .
has anyone any ideas ,am i missing a program to view it ?
thanks

I'm searching for the 307 Peugeot workshop manual since 2005 (ebook)

1.6 110 HDi

Thank you very much in advance.

Hi All,

I read out dump from Autoliv 610 90 16 00.
Eeprom: 95640

Unfortunatly I don't have soft to clear the crash.
Anyone can help me out ?

Attached Files

crash_Autoliv 610 90 16 00.zip

70

1.87 KB

Download

Hi
I'm looking for DAS Xentry 1.2011 or 11.2010 version.
All links on forum to this versions are deleted.
Can you help me and post new links on Rapid share
thanks in advance