Hi guys
I have here a polo 6R with a 1.2 fsi turbo charge engine.
I had a turbo problem as it was feeding oil to the throttle inlet and into the exhaust,I took it for repairs and it came back fitted but the problem was not solved.
Took it off and got one from from the salvage yard only to get the same problem.
Took it back and we got one off a running engine with out a drop of oil anywhere,surprise surprise on my car it pushed oil to inlet and into the exhaust.
Any one ever faced this issue before and any pointers to fixing this issue?
hello, could someone help me, I have a berlingo 1.6hdi 75hp (there is already Egr disabled) version without DPF, I would like to make it 90hp. Supposedly it is the same engine as 90hp. Can someone change the maps to 90hp? The car is very sluggish
Im working on a ML320 722.9 transmission, preowned replace conductor plate and maybe some other stuff, old modules are gone looks like the tried to program unsuccessfully.
I don't have access to old modules or any information.
I would prefer somebody to remote connect and take a look or provide some information on how to find the correct SCN coding string.
I have Xentry with working offline coding and Vediamo.
Tried to Virgin but get a error part no not supported.
problem is the gear teach in fails.
Thanks
Hello, i need to virgin dash eeprom 35160wt in correct way, i did my self, but on bench i have 00000km and no red dot, when install to car , i have 999999km and red dot.
Bmw 2014 F30, i changing to the same cluster just with HUD.
hello guys, i have a mini cooper 1.6 petrol.
the cas3+ doesn't work. and i have another cas3+ that has a different code and is from a mini cooper 1.6 diesel.
the used cas3+ also has two working keys.
my question is: can i mount this cas3+, align it with launch and reprogram the control unit by coding it with its frame?.
i have already done several alignments and programming with launch on mini and bmw.
the only problem could be the engine control unit.
passing only the isn code maybe i would solve it or immo off?
i attach the codes of the cas3+ control units so if someone can tell me if they are compatible or if i need the same cas3+, or advise me how to align everything.
thanks
CAS3+ DONOR :61.35-9221719-01
2111660913
Hi guys, I got the micra 2005 akl situation the support to be intelligent key. All tools autel londsdor xhorse avdi ask me for the pin ccode, but there is no sticker in the glovebox .... how can I get a pincode? As I know pincode is not stored in BCM for intelligent keys only stored for basic key, any idea how to do it?
Hi everyone, I offer official activation of WinOLS on your working PC. Choose the version that suits your needs: 🔹 WinOLS 5.77 – $300
🔹 WinOLS 4.82 – $150 Prices are for the software license only. 🧩 Optional plugins are also available — pricing is 20% off the official WinOLS website price. 💳 Payment is accepted in cryptocurrency only. ⚠️ Important:Please use a trusted escrow (middleman) for the transaction if needed — a test activation is physically not possiblebeforehand. Once the license is bound to your device, I will not be able to revoke or transfer it for at least 3 months due to WinOLS licensing policy restrictions. For any questions or to get started, send me a private message. 📦 Limited number of licenses available!
hello; i have vw crafter, and i dont have torque, i delete dpf egr, and no probleme code but i have all time no power engin with limit torque
im finding solution limp mode
maybe temp sensor exhauste limit the torque of engin
i try to disconnect it and its the same
i poste dpf egr + dtc , and the dump, maybe my file its not good.
ecu edc17C54
03L 906 012F
0281 017 666
thanks
Having a problem with my MB Star C6 China Clone, which I bought from Aliexpress. I had Xentry 2019.09 and installed Xentry 2024.09, but I couldn't use it because I had to update the VCI.
I updated it through Allscanner VXDiag, and now I'm getting "VCI—Firmware is older than the installed program version." I reverted Xentry to the same version as before, and it's still the same error. I asked the seller to help, but he won't answer me anymore. Would appreciate help very much!
I have an Audi Q5 in the shop needing gearbox replaced, I can not find an exact match however on partslink it list other gearbox models in the same description.
Do I need to replace it with a PWX or will a NKH,NKJ,PWV,PWX,PJT,QUR work?
Hello . Im looking for a pld repair manual for om501 , om502 engine ecu with a1,a2 type . I have all the other pld manuals except from that . Send message if you cant help !
Hi!
I need file to use with Kess VR, my sub is end
Thanks!
HW: 000018FF013102
SW: 00001BC91D9601
VIN nr.: WBA3N9C57FK247732
SW ver.: CVN: A6D1CF33 PRG: 02
Spare:
Engine:
Ver. HW:
SW upg.: 00001E7B1D9603
System: DME-MEVD17.2.9______
For any questions or to get started, 
