I have problem with front camera on Scenic IV. After changing windshield, no one can to calibrate the front camera, even dealer. Can someone to change codding online? I have scanmatic 2 pro and clip v237. NOT FOR FREE!!!
Hi there! im looking to tune a TTRS 8J med9.1.2 for stage 3 (tte500+). Dyno available. Working with AT master. Would appreciate a tuner familiar with ECU and platform. Thanks
Is it possible to copy a original key or add a new key when I have one existing original key with Diagbox online ?
If not what tool can you recommend that is the cheapest solution to make new key for Citroen Jumpy, Peugeot expert models around 2017-2021. I have original key just want to add one more.
I have 218hp euro3 e53 engine and 6hp26 gearbox from e53 swapped in to Nissan Patrol.
But I upgraded a lot of things on it so I need custom tune or athleast base map until car will be fully finished. I am in Iceland. I installed engine loom from euro4 with lambda and egt sensors, as well e60 eu4 ecu. New 219 injectors, m550d rail pressure regulator, stiffer valve springs, 2865 turbo from Mac perfomance, bigger intercooler, straight exhaust.
BMW F10 2013 all keys are lost. I decided to use the Autel 508 for OBD programming. Autel subtracted the ISN, programmed the key, the the crank is spining, but the car won't start, and the car recognizes the key only when the key is at the steering column. Diagnostics shows errors: 1B2001 and 1B2008. I removed the CAS4 from the car, subtracted DFlash and PFlash from using VVDI , made a key, but it also does not start the car. The key opens and closes the car with the buttons, but the errors remain and the car continues not to start. I have found similar problems on forums, but no solution is indicated anywhere. What should I do to start the car? I am attaching the subtracted VVDI Dflash and Pflash CAS4 5WK50722HBR, 5M48H maybe they were damaged during operation.
hi looking for stock bin file for mec 107-206 di from 2009 nissan 370z manual trans stock file # is 1EA3D , any help with issue thanks , because file on ecm has tune and is locked
Hello.
I make an angine swap on a audi A5. i swap 4.0tt CEU from S6. My gearbox now have incorrect software version and i try to flash the right frf but tcu reject it probably becase the gen have deference. the right sofware i have to install is 4G1927156S I manage to flash 4G1927156A-B-C but not S.Is it possible to make it work mith my tcu or i have to change it to gen 2?
My original file is attaged. eeprom and flash
Hi
can someone reset the DSM eeprom error p179a77 caused due to low battery car not shifting or starting, attached is the eeprom dump from DSM A 0002704452
