I can't write anymore in bench with my dfox, I tried to read in boot an edc17c69, followed the password procedure but the control unit doesn't let me read or write. can someone help me?
Hey mhhauto family. Does anyone have a witech2.0 subscription. I have a ram 3500 that I just need to reset and reflash computer. Only need to use for a couple of hours thanks in advance
Hello need dtc off vito w638 cdi to see if i can get rid of limp mode. tried new ecu, tested all wiring and parts P1188, P1622, P1403, P1470, P1636, P1481
I have a file that was extracted from a GM P59 ECU - I have tried using HPT to BIN to unlock the file as I need to reuse it, can't find an original. But I have not been successful unlocking it. Can anyone provide assistance? File attached..
hi,
i have mini cooper r57 that does't start & i could't match the dme/cas with diagnosis tool.
any one can do cas/dme alignment on bench
attached is the file for the cas and dme
Hello I swapped Om651 with OM646 in W204 year 2010, manual transmission. I have bought whole Mercedes W204 with OM646 which was hit infront, but it start and run. After the swap the W204 year 2010 won`t crank and start. What I should also change. I have already put the ECU from the OM646 and also the EIS, but when I put the EIS from the car with OM646 (year 2007) on the dashboard even the warning light doesn`t come. On the bumped W204 all have worked, I mean ESL (steering lock) and it starts. On the W204 year 2010 it has some sort of emulator for ESL. What if I swap both front and rear SAM module, will it start? I have Xentry with C4 DOIP, if I can do anything with it. Sorry for mistakes, my English is not very good.
Thanks in previous
I have did more ecu's like this but this time I corrupted the file and after write no communication trough obd with flex. Also on bench no id and thought of boot but magicsport has no protocol for this only bench and obd but need id first, even tried with similar movano connect and change OBD port to this movano to recover after trying to unlock it says it failed. I have lukely read before trough OBD virtual and real read, takes like almost hour. But after write the ecu was corrupted and no communication. Does somebody know how to fix this? not for free ofcourse.
I thought if i buy another ecu on scrape yard then is writing trough obd enough? Or must I contact support of flex/ magicsport?
here are the real read and virtual
Hi guys I have fiat 500x with bcm problem( all doors deadlocked). I want to clone my one with second hand bcm from ebay, but I cant find exactly same part number module, maybe someone from experience can tell me if they have to match 100% ?
And I have problem with engine misfires on cyl 1, no signal to injector nr1 , is that common with 8gmk ecu? I read about software issue and not hardware is that true? If I read my ecu, maybe someone can help me fix it? Im looking to clone ecu, but cant find with same numbers like mine, is that important for cloning? Thank you
