i have an issue trying to immo on my car i changed the ecu from an old car .
but when i try to get the code using vag commander i get 65535 and when i use it in VCDS it gets stuck.
Is anyone on the forum able to code U88 on my 2022 EQS 580. I upgraded the wheel to the AMG version and it comes with these two oled screens (and the AMG drive unit inside the wheel). I would like to be able to actually use them. If you can, feel free to reply or PM me.
Hi,
Anyone who can fix CS for MB Temic PLD euro3 tuning files. Tool which I am using does not make CS.
Ori files attached. Have two different Ategos, both 177hp versions. Older one with 29F200 (256kb) and other with 29F400 (512kb)flash.
Hi friends, can someone help me with the immo off feature on this Subaru SH72543 immo off control unit? I'm having trouble with both smart keys. They always open properly, but apparently, the control unit shows a lock and won't let me start the car. I have the flash and the Eprom! Thanks!
Hello! I bought Kia Sorento 2007 3.3l with damaged RE5R05A trans ( no reverse). I replaced burned clutch pack,blowed seals and rest of seals. Transmission work very smooth but have one problem. On high speed when lock up is appiled and i make kick down the trans or engine hits/knock when drop gear from 5 to 4. Always same, when its going from 4 > 5 > lock up and when i make kick down it kick/hit on reduction. It look like problem with lockup drop. When trans change from 4 to 5 gear and before lockup i make kickdown it reduce smoth without this hit sound. I dont touch torque conventer (because dont slip) and dont refreshed mechatronics. Its possible it will be bad solenoid or bad tcc piston or something? There is no dtc. When i first time noticed this hiting it has 10x more force. After few kilometres it quieted down to acceptable level like old bmw with little used rear diff and axles. Maybe someone have idea?
2 weeks ago on a 525d e60 edc16c1 we done dpf off and Egr off and turbo change, now car has this problem, anyone know what I can do to solve this problem, car don’t let delete all dtcs like gearbox wheel abs… any ideas
Thx for help
I’m looking for a European (EU) version flash file for ECU Bosch MED17.1.1 from an Audi Q5 2.0 TFSI (CDNC) – year 2012.
My current ECU details:
ECU Part Number: 8R0907115P
Bosch HW Number: 0261 S049 785
Software Version (SW): 1037516960
Processor: TC1796
Current flash: USA version
Issue: Speedometer scaling is incorrect (digital reads 40km/h, analog shows 20km/h).
Need: EU flash file with correct speed scaling in km/h.
IMMO can be active or OFF – doesn’t matter.
If anyone has a full EU dump or can read it from their own unit, I would really appreciate your help
I can also share my current USA flash + EEPROM with IMMO OFF if needed.
Thanks in advance!
Hi, I bought a used odometer for a Fiat Fastback (made in Brazil), with the mileage reading 23165 km and I need to correct it to 4162 km to match the original. Could someone please help me? I found an EEPROM 532RQ (95320) with the attached content.
Type of software: Spare Parts Catalog, Service Information, Wiring Diagram, Service bulletin, Specification, Service & Maintenance for VOLVO Equipment.
Interface Language: English
O.S: Windows 10 or Windows 11 Pro x64
Note: Spare Parts Catalog & Service Information
for more information PM me, I will provide you with all the details.
Hello everyone. Help me find the values of FMOTC, CANVERS, and CWGC in EDC15P+. Perhaps in diesel ECUs they are called differently. I need them to use another AG.
Unlock full diagnostics and programming with Ford FDRS (Ford Diagnostic and Repair System) access for a whole year!
What You Get:
• 12-month login access
• Works with genuine and compatible VCM II & VCM3 tools
• Perfect for dealers, repair shops, and tech-savvy DIYers
Hy,How can I check my car key? i have a problem and do not know how to do it. i drive a Hyundai i40 and have 2 car keys. 1 car key i can not open the car. how can i find out if the coding is still intorund on the key etc.? i have a key programmer from Launch. can i use it to reprogram it etc.? i hope someone can help me. Thank you
I replaced my instrument cluster in my Audi C5 A6.
I think the donor part comes from a Quattro with Auto trans, but my car is a FWD with manual trans.
The adaptaton on Channel 50 and 21 was successfully, and the immo3 keymatchin too.
The car is running well but in instrumen Cluster module have some AWD module and Transmission module related fault codes.
I think the cluster search for those modules.
The softcode in the original Cluster was: 00040, but i cant rewrite them.
01303 - Telephone Transceiver (R36)
49-00 - No Communications
01304 - Radio
49-00 - No Communications
01315 - Transmission Control Module
49-00 - No Communications
01324 - Control Module for All Wheel Drive (J492)
49-00 - No Communications
How can i adapt this cluster for an FWD manual car?
Hello, friends
AGCO EDT 1.91 - The program is not installed
I run file EDTUpdate.exe - error Start Install Failed
There is no error description in the log. Maybe I need an English version of the OS? Or is there some additional program missing? The framework is installed
![[Image: 777888.png]](https://i.postimg.cc/5tJxs31H/777888.png)