Good day to all! I have a question about the f12 berlinetta (2016). According to the factory, there is no additional passenger display. We bought an original new set (70003948), installed it, but as it turned out, it needs to be activated programmatically. Does anyone have any options or should I go to the dealer? Thanks in advance!
Hello, can someone help me? I have a steering column with numbers 1s1423520ak
and a controller with numbers 2q1909144r
can someone tell me what numbers I can replace it with?
I have a Citroen C4 1.2 Puretech 110cv (auto gearbox) that has the ECU completly unreadable.
I bought a second hand ECU (valeo vd56.1) from another citroen c4 cactus but with manual gearbox and 130cv.
The ECU HW (both car ECU and used car ECU: 9815023380)
Car original software that I dont have 9697378780 (the correct one): 9697378780
Edition: 16.03
I only think about 2 ways to solve this
- looking for the virgin file for this ECU and via diagbox original telecharge it
- get a similar software with imo off (the original ECU is A2C1950700101 / 9829728480
Or A2C1725450101 / 9828311880) and software reference 9697378780 or similar
Can anyone help me with any of these solutions or other solutions? I can pay ofc!
i have a 6q0909605S Airbag with water-damage..... now VCDS say: 65535 defectiv..... anyone can repair? Can i swap it to a other ECU with the same Index?
Hi guys I would like to ask you for advice.
I have a FORD FOCUS MED 17.0 _1.6 petrol control unit.
* BV61-12A650-YC _ 0261S07264 *
I need to clone this control unit or load the original software into it.
I would like to try the new software first. But what about OTP?
Hi,
I would like to disable seat belt extenders on prefacelift w238 (2018).
I found out gurtbringer option on reversible belt tensioner module, but it does not seem to be working (i have changed only on one seat if that matters)
Is there any other place to change it, does this specific option reflect anything.
The best outcome actually would be to have them available by a button on a central panel but disable them during opening closing the doors.
Hy i have an w 205 2019 48v Hybrid the car had an crash and 48V Battery was only 20V . I charged the battery but diagnostic says B183397, B183339A, B183349.
and car not starting. Now i readed the eeprom M95M01 with programmer . Maybe someone can Help me and unlock the battery.
Hi guys, maybe this question is made earlier here but i couldn’t find it sorry.
Basically i wanna start learning Winols slowly step by step, any headstart points or videos or anything for a beginner.
Thanks a lot in advance
I recently had an issue while programming my CAS3 module on a 2007 328i E93. Is it possible to save the module? Do I just buy a used one and try to code that? I have pulled the eeprom and flash data files off my current CAS module. Any guidance would be appreciated.
Install "dps_installer_v4_56_0000_Complete-new.msi" to C: drive
If you install to any drive other than C: then you will need to reconfigure runasdate in the DPS folder.
Only run DPS from the desktop shortcut as that changes the internal date for the certificate to not run out.
Once you have DPS started
Go to "Program Controller" and import certificate from C:\dps\Certificate+PW-Asdfghj75
Click next until you get to the enter password screen and enter password "Asdfghj75" and do not change any settings and click next until complete.
If by any chance you run DPS with the current date and delete the expired certificate, run DPS with the changed date and reinstall the certificate as described above.
Password is Asdfghj75
The password is also in the c:\dps\Certificate+PW-Asdfghj75 folder as password.txt and it is also part of the folder name so you will never lose it.
That is it you are ready to use DPS
Note: the following may no longer be necessary as I have no trouble running type 4 apps with SPS installed but you may have to for your installation.
If you have SPS installed then the type4 button will not be greyed out but it will not work until you make a backup of the 2 files below
dllsecurity.dll
tisvcsv4.dll
from the folder
C:\Users\username\sps\nativelibs
Then you need to copy the same two files from the folder
C:\DPS\Type4 App Crash Optional Files
to the
C:\Users\username\sps\nativelibs
folder replacing the files you just backed up.
You need the backup of the two files as they will be needed if you do online SPS GDS2 as you will need to put them back
Swapping the two files around will be necessary to use the programs.
Is there some calculator to find abs long code for polo by vin?
Vi code [font="LFT Etica", "Lucida Sans Unicode", "Lucida Grande", sans-serif]WVWZZZ6RZAY105880[/font]
![[Image: VAG-PCR2-1-DECODER.png]](https://i.ibb.co/1tZ6n4xh/VAG-PCR2-1-DECODER.png)
