Hello. i have problem on edc17c66 mercedes vito , remove scr and after 5 months the van didnt start anymore. so i put old eep, and after 4 months it stopped again. The problem is 100% on scr solution, couse it was updated by dealer, and i heard that new software make this problem. does anyone have the same issue ? thanks
Hello, can somebody look at this file and tell me why if i make any change on flash file,car dosen't start if starting so car going well about 40 sec after that max 1000rpm , but with ''orginal'' car going in limp mode max 1300rpm but starting without problem. Car Ford galaxy 2013 147kw 200hp 2.2
I had problems with Mini Countryman S 1.6 all4 with shorted dme(7619333), so I replaced it with set dme(7612190) , cas and key. Now car starts and run normaly but abs and 4x4 lights are on and error codes 5DE3, 5DF7.
I’ve updated with WinKfp DME(now inpa shows part no. 7639049 which is compatible replacement), cas module and dsc(change VIN to match cas and dme).
I’ve also coded it from frm fa to cas and dme with NCS.
When I try to code DSC it throws error, not responding, but I can flash it, read it in INPA, ISTA, etc.
Does anybody knows what could be the problem?
Current status in INPA: https://ibb.co/tpGFWSRM https://ibb.co/LhqgPLhm
Hi,
Anyone has insides how to interface with Robert Bosch CAN on comand? Bus speed? Any info will be appreciated.
I have W163 unit that does not have CAN B (apparently). Would like to be able to intercept button presses.
I solved the problem with the intake blockage by requesting to turn off the EGR, after uploading the software I found problems with the rich mixture, the lambda value was still 0.4 to 0.8. Also, during DPF regenerations around 400 - 500 km, the regeneration no longer wanted to end around 5g as it was before. The regeneration took a long time even below 1g and did not want to end automatically. In order to interrupt it, I have to turn off the engine. That's why I decided to use the version: FL_7P0907401___0011.frf to replay. It went without a problem, no changes are made to the EGR settings. The EGR is still OFF. Could anyone advise me whether the modified software for EGR OFF is modified correctly? and how to proceed to possibly update using Odis to get it to the original state. Do I own a VAS5054A to upload the software or will I need something else? Thank you in advance for your willingness. I am attaching the software before and after the modification for EGR OFF. https://drive.google.com/drive/folders/1...sp=sharing
hello i have w211 e200 cr3.11 car is not cranking and the are no faults in ecu,i tryed several versions with virgin and sync with mb star it give me that ecu is already paired but no sucess i check all fuses also ezs eeprom and flash is ok. i think eeprom in ecu is faulty can somone check it ?
Hi,
Customer towed in 2010 Qashqai with 2.0 DCI. EDC16CP33 with BCM.
Original immo coil was destroyed, someone already changed whole ignition, I was able to get it back to ori one, put the working coil on it and tried to start the car. Unfortunately, IMMO is working and car won't start at all.
I read flash and eep from both, BCM and EDC and it seems that in BCM are no keys stored. When I tried to program new key, it won't register.
Also tried to use Julie emulator, but when I write the IMMO code from EDC to Julie eeprom, it won't work at all. The blue LED on Julie is off and blinks once every two seconds, so it means that it can't connect with EDC. I tried to write another EEPROM to EDC, I had one with auto gearbox, and on another eeprom Julie is behaving properly, but car won't start either so I suppose it might be something in EDC EEPROM, but can't say for sure.
It's 2010 Manual model.
I attach both, BCM and EDC reads, maybe someone can help with getting virgin files for both of those modules so I can program everything from the scratch ?
I support REPROGRAMMING FRONT RECOGNITION CAMERA LEXUS NX SERIES (NX350, NX350h,..)
Because there is no error message on the cluster, the customer will not know. But this is a safe issue
-> please advise the customer and is an additional option for garage/workshop services.
(and all Programming when replacing a new Unit, used Unit for Toyota Lexus cars (SRS, EMPS, Engine, Rada, Camera, Tranmisson,...)
[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif][/font]
If you want to do it quickly and reliably, please contact me via whatsapp. I will help you faster.
All services are in the attached txt file.
PRICE: 100$ - 200$ Depend on model Toyota/Lexus.
CAR INFORMATION:
Brand: LEXUS NX SERIES (NX350, 350h,..) Year: 2021~2024
Model code: TAZA25L-AWZLTV,...
[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif][/font]
Problem:
The subject vehicles are equipped with a Toyota Safety Sense (TSS) 3.0 system or Lexus Safety System Plus (LSS +) 3.0, containing a forward recognition camera to detect objects for certain driver assistance features, including pre-collision braking, lane departure warning, and more. .
Due to inappropriate programming of the software within the forward recognition camera, there is a possibility that under certain conditions, LSS+ functions could become inoperative for approximately 4 seconds before rebooting and becoming operational again
or
there is a possibility that the memory inside the forward recognition camera could fail during processing when the ignition is turned OFF. If this occurs, the PCS will not activate on the next ignition start, causing warning lights to illuminate, audible chimes to sound, and messages to display on the instrument panel.
[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif][/font]
NOTE: Techstream software, or GTS+, will NOT show pop-up notification, we need to manually confirm to know whether the car needs to update or not based on the table above.
[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif][/font]
Time to perform: 30min - 1 hours
All services are in the attached txt file.
Please contact me via whatsapp (informations find contact in my profile)
For urgent cases that you need to do immediately (ECU Security, Programming, 12 digit keycode...), if you send a message and there is no response, please call me. I will support within 5 minutes.
i have an issue about the following ECU for EGR off.
Solution does work but idle RPM is not constant any more once EGR is closed. Especially in cold conditions the idle RPM is fluttering. It´s not extensive but still recongnizable.
Probably anyone know this problem and knows any improvement for this.
Hi I would highly appreciate it if someone has the original flash for Engine ECU for Mercedes benz 2005 SLK 200 Kompressor R171 Manual. I have a SLK that the engine ECU has been swapped out with a W203 Automatic ECU. Mine is a Manual SLK 200 manual. It indicates that it has been coded for a W203 auto . WBD171442
Hello, I had to replace left headlight in my Seat Leon IV - found with the same number as old one. Control module (992941571AE) was also damaged so i bought another (992941571AA - hardware the same as mine). Can you help me to make it works with my car? I have Odis but I'm total beginner
Hi all, looking for some real world reviews of the ECUHEX software If possible please?
I did have a teamviewer session with the developer and it seemed good, the files are fairly mild in nature but the basics of the tune are hit, but at over £2000 I still need to research more.
) thank you
![[Image: NIyWuBk.jpeg]](https://i.imgur.com/NIyWuBk.jpeg)
[/font]![[Image: WMD4jU5.png]](https://i.imgur.com/WMD4jU5.png)
[/font]![[Image: ELkfpQo.png]](https://i.imgur.com/ELkfpQo.png)
[/font]![[Image: fTPA0Qg.jpeg]](https://i.imgur.com/fTPA0Qg.jpeg)
[/font]
