I need immo off solution or ecu clone solution for this VW Amarok EDC17C54 ECU.
I have attached a flash and eeprom file from OLD ecu and New ecu.
I read ecu with original pcmflash on bench.
If someone can do immo off, need a proper solution without any DTC in ecu or cluster immobilizer warning. happy to pay for a good working solution as i requested,.
Can someone do immo off to my 1.6 gas engine SIMOS 7.1?
My keys aren't recognized anymore. Immo Active appear on the dash and the engine not starting.
I've attached the 93C86 read from the engine ecu 16bit mode.
Can someone modify my file to rise up the idle RPM to 920?
I need to rise up the idle RPM when engine is cold and hot from original state (780-800 RPM) to 900-920 RPM because of flywheel problem.
The flywheel is shaking and an ugly noise is hearing at standard idle speed so I need to rise it up to 900-920RPM even if engine is cold or hot.
Some cars can be adjusted by VCDS but not this one. The only way as I read on the internet is by modify the ecu file via WinOls.
I have attached the .org file. Is a Skoda Octavia 1.6 Diesel. Engine code: CAYC Ecu type: Siemens.
MEDC17 eeprom CRC tool - utility for correcting checksums in eeproms of Bosch ECUs: EDC17, MED17, MEDC17, ME17, MEV17, MEVD17.
Tool works with eeprom files, supported filesize: 32, 64, 96, 128, 192 and 256 kb.
Features:
- automatic CRC algorithm detection;
- supported 3 different CRC algorithms;
- built-in "foolproof" (calculation does not occur if the ori. and mod. files have different filesizes, different CRC types, the same file is opened twice, etc.).
I provide sevice SECURITY LOCK PASSWORD DVD TOYOTA, LEXUS.
If you want to do it quickly and reliably, please contact me. I will help you faster. All services are in the attached txt file.
Video: txt file
PRICE : 50$ - 100$ All model Toyota/ Lexus.
CAR INFORMATION:
Brand: Toyota LX600 Year: 2022
Model code: VJA310W-GKULZ
KATASHIKI
Infomation car on EPC
BEFORE: need input code Security
AFTER: DVD can be reused normally
All services are in the attached txt file.
Please contact me viaWhatsApp(informations find contact in my profile)
For urgent cases that you need to do immediately (ECU Security, Programming, 12 digit keycode...), if you send a message and there is no response, please call me. I will support within 5 minutes.
I had this car in for adblue, dpf and noxcat oxicat delete.
As i am not a user of automated sollutions i prefer nerding around with damos and after several attempts i got it all sorted with just the preturbo egt sensor and the lambda sensor left in the exhaust trajectory.
The issue i had though was that the fans kept spinning hard after the car shut down, for exactly 12 minutes.
The reason is that when egt sensors from oxicat are missing the ecu uses a replacement hot value and then has two maps for how long at which duty cycle it runs and an added delay time.
I post the manual sollution and the original file for you guys. Enjoy and a thanks or rep would be nice.
Hi guys, I have a question: it is said again and again that the ECU needs to be unlocked and/or the password needs to be read. Why? Which ECUs need to be unlocked? My MED17.1.21 too?
I swap w204 front sam. starter relay couldn't start the car ignition voltage is not present in one of the starter relay pin (kM) but it was working fine from the car it was what can I do? I fix another front Sam it started the engine all three front Sam d same part number is it a programming issue please any help my dm wattappe 08102236065 I will appreciate
I have a 2022 dodge ram 3500 6.7L and I want to do a full delete. Is anyone able to tell me what tool I need to use to delete it. Also, is anyone able to make a delete file for it.
I provide sevice SECURITY LOCK PASSWORD TOYOTA, LEXUS.
If you want to do it quickly and reliably, please contact me. I will help you faster. All services are in the attached txt file.
Video: txt file
PRICE : 50$ - 100$ All model Toyota/ Lexus.
CAR INFORMATION:
Brand: Toyota NX350 Year: 2022
Model code: TAZA25-AWZLT
Infomation car on EPC
BEFORE: need input code Security
AFTER: DVD can be reused normally
All services are in the attached txt file.
Please contact me via WhatsApp (informations find contact in my profile)
For urgent cases that you need to do immediately (ECU Security, Programming, 12 digit keycode...), if you send a message and there is no response, please call me. I will support within 5 minutes.
I tried DPF & EGR off using Davinci but it didn't work.
The DPF was deleted by the previous owner and with no dtc so it could already be done.
I removed the EGR recently and would like to clear the dtc and correct the white smoke at hot idle.
If possible it would be great to tune it to stage 1 with popcorn limiter but if not that's also okay, I appreciate the help with DPF & EGR.
I'm not sure what info you might need so this is the readout from the MPPS.
Vin: WAUZZZ4F08N047248
Bosch Hardware Number: 4F0907401C
VW Software Number: 4F9910401L 0010
System Type Number: 3.0L V6TDI G040AG
Hey guys, I'm trying to flash a different OS into a controller. I can license the controller, but then it says unlicensed vehicle after I license the controller and attempt to write entire. I know EFILive you can force in a different OS no problem, but I do not have that software and device. Anyone know how to convert a HPT file to force into a controller regardless of the vin because HPT wont let me change the vin in the editor either. I know there is a way but right now I have wasted credits thinking it would work like it used to back before HPT restricted it. Thanks!
Hi. Need some advice please on my Audi 2021 SQ5. It was flood damaged with bent conrods. I put new pistons and conrods in and was just rotating it before I reinstall to check if anything was binding. I heard 2 distinct clunks as I turned it. I narrowed them down to under the timing chain/camshaft adjuster covers. I removed the covers and each of the tensioners is letting go during each rotation. I have added a short video. I did not lock the tensioners when I removed them. Is this a sign of defective tensioners that now need replacing or can it be something more sinister. It looks to be as if the tensioner gets under x amount of tension then releases which its not supposed to do. Thanks in advance for any advice.
Hello. Can someone help me with adding a used MED17.0.1 Ford Focus ecu? I add Launch or Autel (that is VIN) but then IMMO FAILURE is displayed. There are 2 errors in the ecu from incorrect immo data. There is an option in PATS to learn and reset the bcm ecu, but it cannot find the pin and a window to enter is displayed. Can someone help me?
![[Image: CRC-1.png]](https://i.postimg.cc/tZtvxcxD/CRC-1.png)
![[Image: CRC-2.png]](https://i.postimg.cc/NLBzcQ3n/CRC-2.png)
![[Image: CRC-3.png]](https://i.postimg.cc/fJbqVBTj/CRC-3.png)
![[Image: fMxvvVA.png]](https://i.imgur.com/fMxvvVA.png)
![[Image: EOi1eWD.jpeg]](https://i.imgur.com/EOi1eWD.jpeg)
![[Image: uAHQoWC.jpeg]](https://i.imgur.com/uAHQoWC.jpeg)
![[Image: lOOeWBe.jpeg]](https://i.imgur.com/lOOeWBe.jpeg)
![[Image: LwESCBx.jpeg]](https://i.imgur.com/LwESCBx.jpeg)
![[Image: ZvUU2Ht.png]](https://i.imgur.com/ZvUU2Ht.png)
![[Image: PKzHpp5.png]](https://i.imgur.com/PKzHpp5.png)
![[Image: SGIHv6v.png]](https://i.imgur.com/SGIHv6v.png)
![[Image: qIjptA4.jpeg]](https://i.imgur.com/qIjptA4.jpeg)
![[Image: MHKjwOC.jpeg]](https://i.imgur.com/MHKjwOC.jpeg)
