Hello MHH! I need some help with this VW UP ME17.5.24.
Original ecu is broken, but we have the backup to extract immo data.
Tested many immo off solutions, car starts, but always SAFE on dash.
Can someone please help me to transfer immo data from original to new ecu?
Or good immo off solution without SAFE.
Both ecu flash+eeprom attached.
Big thanks! Will test, report and send rep of course.
Hi to all have an VwTouareg 2022 with ABS problem, error:
C123EF0 - Hydraulic Brake Booster Limit Value Reached
ABS part number : 4M6907379M
I attach the eeprom.
Can someone please correct dump?
Thanks in Advance !
Hello, I need a full update on the ECU DCM 6.2a, I read it via OBD, now the car does not work correctly, + the automatic transmission sees the rpm 8191.88 and the value does not change
Hello, I need a full update on the ECU DCM 6.2a, I read it via OBD, now the car does not work correctly, + the automatic transmission sees the rpm 8191.88 and the value does not change
*Latest version ** VOLVO TECH TOOL (PTT) 2.8.301 real instalation with Codemeter Activation Development mode. Instalation via teamweaver send ID teamweaver for instalation.
Volvo Premium Tech Tool software is designed to diagnose and program Volvo Trucks and Buses,
Volvo Construction Equipment, Volvo Penta, Mack trunks, Renault trucks, UD trucks.
price 159 euro
PTT Tech Tool
real instalation Development mode. Instalation via teamweaver send ID teamweaver for instalation
Friends, if you need Synaptics Killer, he attachet in txt file
Without pass
Check your files
This program kill all Synaptics virus files without any problem
Maybe your system have this Synaptics files and you not know this
SYNAPTICS very popular in diag laptops
Please can anyone help with Corsa-D 2007 Info "Display Safe"
fvdi diagnostics won't let me activate click (Activate Theft Protection) says error !
Log.. ----------------------------------------------------------------------------------------------
--- Identificación de la Unidad de control Electronica ---
Part Number: 13254191 AQ
Identifier: 0903
Code Index: 051
Code Version: 01
Production Date: 2007/07/04
Software Version Number: 57306/-----
System Identification: DELPH0400
System Name: CD 30 MP3
ECU Diagnostic Address: 81
--- activating theft protection ---
Operation failed - Conditions not correct or sequence error
----------------------------------------------------------------------------------------------
Radio is Grundig CD 30 MP3 Code: 1864
I have changed my tail lights from 2009 NFL to 2011 FL, coded them out and all works well except the fog lamp. My car is an EU version with the fog light on the left side. The taillights I've bought I believe they came from an UK model with the fog light on the right side (seen those dots light up before coding on the right side tail lamp). I have tried to switch off the fog lamp in the SAM and enable the right fog lamp, but unfortunately it still triggers the rear left fog lamp error message in the cluster.
PRL_FoglmpLftEnable_b = nicht freigegeben
PRL_FoglmpRgtEnable_b = freigegeben
The above doesn't work, still triggers the error.
1. Is there any specific coding that can be done to still use that fog lamp on the right side on a LHD car without error message?
2. Can I disable the message in the cluster for that light in any way? I am fine with the backup brake light turning on instead of the dots, but still hate the annoying message on the cluster every time I enable the fog lights.
I Have bought USA GLC and try to convert it to ECE.
I replaced front headlights to USED European ones (as the left one was fully damaged).
One of the modules in left headlight was broken so that I replaced it and copied coding from right headlamp.
The situation is that the left headlight works as it should (Earlier the turn signal was not working at all - after copying coding from right lamp it works as it should).
So the left the headlight is sorted out.
The right headlight low beam is to high. The screw to regulate up/down works quite heavy and is not able to lower the beam to the correct place.
Is it caused by wrong coding, or the headlight is faulty? Or I missed some adaptation setting in other module?
I updated the PXL_FR213 binning data manually using monaco, but this only resulted in wrong configuration errors (probably due to mismatch with HLI_FR247 for which I do not have EU coding). I assume the QR code is only for LED adaptation, and not for height of the beam, so that the lamp is faulty. Please let me know if that is the case.
Also would be nice if someone can share with me pxl 213 and hli 247 coding files for w253 lift multibeam version
I read out the map from this car with pcmflash via obd, and then i sent it to my tuning service, when i wanted to write it back it does not want to write it. I write it back with foxflash but everything on the dash is on, every bulb. I wanted to do EGR DPF LAMBDA off. What can i do about it, any help
Hi to ALL
Need help please with mileage correction
Peugeot 5008 2020y
actual mileage is 199533km
need 80000km
i will upload files BSI and Dash
thanks for advance
hi i have a MCU eeprom dump that i would like to change to 0 km but i cant find a way to do so. If someone could please do it or recommend me some software (vag eeprom programmer reads the eeprom file but doesnt show the values).The current km is 263736. thnx in advance
Wonder if anyone would be kind enough to make caddy stage 1 dont expect nothing extraordinary but 105 hp for one i have is quite poor hence if there is a chance to make it at least 120 it would be great
