Hello, I have a 2016-17 Renault Trafic III, it stopped starting due to a failure when making a new key, I bought a new starter kit, and we installed it today, but when installing it I get the airbag light on and when I close with the key control the van closes and opens alone instantly, what could it be?
Can someone help me repair this damaged eeprom? i also did a readout from other eeprom.
Kessy module from audi s8 2007
4e0909131k.
tried with odis but says no data was readout by ecm. When trying to adapt the new(used) kessy module. So odis doesn't work for me, or someone know how to solve this issue?
Hope someone can help me! Will pay for the working solution.
I bought a Chevrolet Aveo LS 1.2 16v with a manual transmission system and the ecu that is in it is a picture of it attached. Is it for a car with an automatic transmission system or not? Knowing that according to the vin, I concluded that my car came out of the factory original with a manual system, and the problem is that I have dtc in diag related to the automatic transmission system and problems that the engine that is present does not have an EGR system and the ecu is registered as not present and the automatic transmission system is not present either. So please, what kind of ecu do I put with this engine of mine, b12d1 lmu?
Hi everyone. I have Petka 8.3 installed and would like to update it if possible to 8.5 or 8.8.
I fully understand that this comes at a price so I'm not asking for a freebie. I'm happy to pay any costs involved.
I am asking for advice with the upgrade itself. I didn't install the 8.3, it was installed by a friend who passed away recently. So I would need to do the upgrade myself and my knowledge of Petka installations would fit on the back of a postage stamp. I'm quite capable of installing Windows, drivers etc, but Petka is something that needs to be done correctly.
If there's anyone out there who is happy to guide me through the upgrade and activation I would be very grateful, and also very happy to pay any costs involved.
Hope to hear from someone prepared and happy to help and advise.
Hello everybody, Can someone share Electric diagrams for Volkswagen Scirocco 2009 2.0 TSI 4 cylinders automatic transmission DSG please ? Especially canbus diagram please.
I have in my hands a 2010 OPEL MERIVA B 1.4. The ecu it has is a DELCO E83.
I have erased the DTC P1101 with the tool xdecoder and after testing the solution is not correct, since the DTC still appears in the diagnosis. Can anyone help me with a correct solution for these ECUs?
I attach original file. Thank you very much in advance
Hello, I just performed an AdBlue off on a Mercedes EDC17C66. The car starts, but there is a DTC code P1521 . the AdBlue ECU is disconnected.
I would like to know if this issue is serious for my client's use. Thank you.
I need help with adapt the new ABS unit to the Ford C-MAX II 2019. After installing i got ECU error P161B - Incorrect response from secondary immobiliser module. The ignition turns on (keyless), but the car does not start. Instrument cluster display shows a message: Immobiliser error.
Everything is fine with the old unit, the car starts, but one solenoid is jammed.
What kind of equipment is needed, is it possible to do this without online? Or is it possible to clone from old unit?
hi
been battling with this denso ecm 1J500-59051
managed to flash the ecm with the correct data but as pointed out by a few members the DPF soot % is stored on a eeprom which MMC flash does not read.
ive managed to get the ecm open and theres 3 eeprom chips (see attached pic)
ive managed to pull some memory off one of the eeprom
can somebody please confirm this is the soot data? and set it me to 0% ? its gone past 100% and lights flashing even tho dpf delete has been done (needed doing before going past litimts)
Could someone help me out? I have Citroen 2.0 HDI 100 kW manual with DCM3.5. Need full original MPC file for 9666912580 HW ECU. Engine is DW10CTED4. No original ECU, used ecu bought but flash is incorrect for this car. Found file from 807 100 kW, but it seems it is from AUTO, no starter.
Seems that some files should fit from PSA, Fiat Scudo.
Good morning everyone,
I am trying to figure out how I can adjust the mileage of a 2000 Grand Cherokee,
I am attaching a picture of the dashboard, I hope someone can give me some information.
I have searched online for the datasheet of the processor but nothing can be found.
[font="MHH Font", Calibri, sans-serif]Hi, I need to clear crash data on a 2013 Honda CR-V. The SRS module is 77960-T0A-N013-M1 with eeprom 95640
I have also attached a dump of the eeprom from the module. I would be grateful if someone could help.[/font]
