Hello, i have a 2020 BMW G20 from US.
I wanna do us to eu conversion.
What can be done without the fsc code? only language in mgu/kombi and frequencies without voice commands and maps?
Anyone in forum can help with getting FSC or dealer is best/cheapest option?
Wireless AA/Carplay is already activated.
Also if the language change is possible with fsc, what's the best way? fdl or vo coding mgu/kombi?
Also is it possible to code US laser lights to EU spec or there's hardware difference?
I've done quite few F series, but it's my first G.
Lets see what people have tested from their solutions. There is no good place to search for feedback, just few info here and there that some things do not work.
I need some help activationg cruise controll on Peugeot 207 with MM6PLC ECU.
When i try to activate option in manual coding I get error stating:
La valeur du paramatere *1 est invalide : management of engine cooling
Engime cooling management is set to Dual speed fan assembly (I do not change that value and it is the same as the one read with print parameters).
Only parameter that i change is Cruse control (RVVV2) from Absent to Present.
Bonjour à tous, j'aimerais connaitre vos avis si je dois faire un choix entre dasccoder4 et diagprog4 elprosys selon vous quel est le meilleur choix ? Merci d'avance.
I've spent 6 hours today trying to enable Carplay on my W213 with NTG 5.5 Non-MBUX. After going through hundreds of unhelpful threads I've come across some threads that pointed me in the right direction but I couldn't find anything complete. So here it is.
I used a $15 chinese Tactrix Openport2.0 interface
Prerequisites:
DTS Monaco 8.14
Xentry
SMR-D files
HU55ENTRY
EZS213
0. Don't start the engine, the car should be on key position 1
1. Launch DTS Monaco
2. Temporary Workspace
3. Select EZS213 & HU55ENTRY together.(If you have a different car such as a 167 there's an EZS167 file as well)
4. MBCar_MBVan-SMR_DiagnosticCAN_V_02_05
5. In the Quick Test tab hit Start, HU55Entry should fail EZS167 should succeed.
6. Go to Diagnostic Services, EZS213, GenericJobs, Security Access Level 39, Transmit. You should see on the bottom a "Status success"
7. Go to Variant Coding, for ECU select HU55Entry and hit Connect.
8. At this point if you had any music playing it should have stopped. Your screen should now say 'Diagnostics' in the top left.
9. DOM - Telephone Application Write - Enable MB Companion IOS and MB Companion Android. Hit 'Do Coding'
10. DOM - Companion App Write - Select Android UUID set it to the UUID not Default. Hit 'Do Coding'
11. DOM - Remote UI Application Write - Select ON for the following Remote UI Services, CarPlay via USB, CarPlay via WiFi, Automotive Link via USB, Automotive Link via WiFi. Hit 'Do Coding'
12. Go to Diangostic Services, HU55ENTRY - Ecu Reset - [11 01] HardReset Reset. Hit Transmit.
The system should restart and now you should have Android Auto and Carplay.
--
Acknowledgements and thanks go to Adyp because his thread because his thread provided great insight into how security management works with DTS.
--
Errors I've encountered in the process which I've wasted quite some time on:
Domains that failed to write: Companion App Write (NRC = 0)
Domains that failed to write: Remote UI Application Write (NRC = 0)
Start Communication (Service): No matching entry found in Compumethod for value 241, parameter NRC
I recently installed a touchpad from a W205 (facelifted model from 2020 and onward) in my 63'S W213. However, I’m experiencing a strange issue with the screen.
All functions, including the touch sensitivity, work properly on the touchpad. When I start the car, the screen wakes up and displays Apple CarPlay, but without any music. The issue only resolves when I touch the touchpad or adjust the volume, and a few seconds later, the screen shuts down and restarts after about 30 seconds. This cycle continues repeatedly.
I’ve tried performing a hard reset on both the TPAD55 and HU55, which seemed to work initially, but the issue returns after the first restart. There are no errors in Xentry or DTS; everything appears to be functioning normally. My touchpad is the part number A2059007146 and the cable is A2135407421. I've tried with the original cable of the car, and it's the same problem.
I hope someone here can help me find a solution to this problem.
Good afternoon
I need to know if the eprom of my file is ok
The car starts and stops a few seconds later.
and then it's hard to start
the error in diagnosis is p0602
original file attached
Hi all
I am selling
Caterpillar 70 pin Bench Flash Harness
It is to be used with C7,C9,C10,C12,C13,C15 and C16 Engines.
Uses:
Flashing Standard Calibrations
Flashing Customized Programs
Diagnostics when OBD plug faulty
Programming the ECM when not on the truck
Cables are in high quality tinned wire. Oem connectors and pins. Larger battery clips for whatever power source you may have. Fuse protected.
All harnesses are tested flashing an ECM after build
Price only 230 $
I Ship inside USA and also ship to Canada
I do free shipping inside USA
Shipping to Canada will cost around 40$
Hi guys, I've been given this Mercedes that has been reprogrammed to increase power. The customer wants to return it to factory settings.
Where can I get the original file? Does anyone have this file?
Heya all,
I have a 2017 Toyota HiAce 1KD that I tried to do DPF delete on 3 months ago - light is back on
Can someone please do DPF delete - ToyoLex did not work
I have a 2005 bentley continental flying spur which needs a wiring loom which I have bought but need diagrams to fit as old loom was removed by someone else
Thanks
![[Image: 2.jpg]](https://i.ibb.co/ym2m3Tyw/2.jpg)
