Good morning, I have a problem with a Mercedes W211 2.2 CDI E220, namely practically nothing works, turn signals, electric windows, no battery charging, the radiator fan works all the time after starting the car. I checked all fuses and relays, they are OK. After connecting the computer, I have practically no communication with any module, only the CAN gateway and gateway are reported, but there are no errors in them. What could be causing this?
Need to make this file Virgin, Mileage is fine but vin mismatch so need to make virgin. There are a couple of instances of vin and I am told one is checksum so hoping someone can modify it for me. I will leave thanks and report back. Thanks in advance
hello everyone guys!! I performed an engine swap on a 100 hp panda with tjet engine and all the electronics now my problem concerns the immo I tried with a virgin file but nothing can anyone help me with immo off for this ecu which is a bosch 7.9.10?? thanks to whoever will help me
I need your help with the original measurements of my car!
I went to the annual inspection with my car and now after 6 years they told me that my car is too low, i.e. it has too low a ground clearance and that it is not original. I have tried everywhere to check and look for information on this but nowhere have I found anything to justify this.
Could someone help me with the technical data of my car based on the body series? I would be most interested in how much ground clearance it should be and where exactly it is measured. Or based on my body series if the car is sport suspension equipped from original or not.
I support Programming when replacing a new Unit, used Unit for Toyota Lexus cars (SRS, EMPS, Engine, ABS, Rada, ...)
If you want to do it quickly and reliably, please contact me via WhatsApp . I will help you faster.
PRICE : 50$ - 150$ All model Toyota/ Lexus.
CAR INFORMATION:
Brand: LAND CRUISER LC300 GCC Year: 2022
Model code: VJA300L-GNUZZV
Information on EPC
[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif][/font]
BEFORE: Many Warning light TURN ON
[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif][/font]
AFTER: All Warning light TURN OFF
All services are in the attached txt file.
Please contact me via WhatsApp (informations find contact in my profile)
For urgent cases that you need to do immediately (ECU Security, Programming, 12 digit keycode...), if you send a message and there is no response, please call me. I will support within 5 minutes.
Hello , i have a mb sprinter 2.2Diesel, 2014 .
Problem is no pressure in intake manifold , all soleboids on turbo , low pressure and high pressure turbo controls work propertly, all hoses and intercooler are ok, and no check engine light in dash, so i decide , maybe its flashed , and not done correctly , and thinking about egr , he have a sensors on tubes ( from exh manifold to egr) , but diag not show any problems. Under text ecu sticker photo. So i searching a ori file , to see whats wrong with that bus...
Hello good morning,
I need help, I have tried to synchronize dme with cas3, but when I try to start the engine it doesn't do it and in dme
I get the error p16cf or 32E2: "EWS immobilizer protection again tampering implausible" could you help me see if I'm doing something wrong.
I will attach the eeprom and flash files of cas3+ and dme mevd17.2.4
Hi I have a Cadalac bls 2008 model need to ADD CIM that was replaced when Iplug tech 2 in and want to get sercurity access it see vin but see error , I need working tis2000 for Cadalac is there a solution I have Saab tis but does not work
Cheers
Hey i replaced a cluster in a 2006 ford f150 i have and need to do mileage correct, unfortunately my scanner doesnt do it. i even tried backing up file from old cluster and uploaded to new one on forscan. nothing fixed it. any ideas how to do mileage correct on this car? from what ive seeing it doesnt have an eeprom? maybe im wrong
Guys I downloaded all the file and extracted successfully but i have problem with run the file latest java and run all the commands for fixing the issue copy paste file location to environment variables anyone can help pls cheers
Update problem solved by editing the file name to lower the version
Hi Guys. I have a problem with DelcoTDS and Techline Connect. I purchased a VIN. No problem. Do the programming. No problem. This is it in the morning. On the afternoon i want to sniff around. This its the first time i use this kind of programing. Again enter in the ACdelco TDS web and i want to click on the VIN i purchased. When i do the click. New TAB open and i get the following error. "Access Unauthorized with destination system" attacht the screenshot.
Anybody can help me?.
I have issue with Immobilizer active on dash in 2010 VW Golf. Vehicle had no keys programmed and windows were not working. I programmed new key to dash with carprog and now windows work. The ECM was from a different car. I put immo data from the dash /corrected VIN/CS/MAC in ECM but still car doesn't start. I wrote immo off on flash in ECM and car starts but still IMMO active message on dash
Can someone remove immo active message from flash or eeprom or match the data to get rid of "Immo Active" message please
Attached immo file from dash and ECM flash and Eeprom
![[Image: SYDfBBB.jpg]](https://dub.sh/SYDfBBB.jpg)
![[Image: P6XHDtp.png]](https://i.imgur.com/P6XHDtp.png)
[/font]![[Image: sHYVmx0.jpeg]](https://i.imgur.com/sHYVmx0.jpeg)
[/font]
![[Image: af532987f4cf20fd88eafe84f265b134.jpg]](https://uploads.tapatalk-cdn.com/20250226/af532987f4cf20fd88eafe84f265b134.jpg)
![[Image: Mpmihmu]](https://imgur.com/a/Mpmihmu)