Hi what calibration file for this ecu 237101082R ? On nissan-techinfo not work to determine the calibration.I need file to update ecu with ners.Thanks .
I was searching for the wiring diagram for a retrofit of code u19 Augmented Reality for the X253 GLC Facelift.
Also searching for the wiring harness for this car.
I have a Mercedes GLE W292 with Comand NTG5.1 and tried to perform a navigation update. After entering the PIN to start the update, I kept getting the error: “The map update is not possible. Please refer to the owner’s manual.”
I then ran a self-test of the HDD using Xentry, and the result showed: • Reading: Successful • Writing: Unsuccessful
In DTS Monaco, I was able to read the serial number and model name of the HDD.
Now, I am considering replacing the HDD with a new one. My question is: If I install a new HDD, is it enough to initialize Comand with Xentry Online or should I reflash the current Comand firmware and then reinstall the navigation maps? Will this properly format the new HDD, or do I need additional steps?
Has anyone dealt with this issue before? Any help or insights would be greatly appreciated!
I need help with the speed and rpm limiter on this ecu. The ecu is Delphi DCM 1.2 and the vehicle is a Nissan NP200 with Renault K9K (1.5DCI) engine. I have changed all the torque limiters to 0 at the desired rpm level but this doesn't have the desired effect. I need the speed limit at 135 Km/h and the rpm limit at 3800 rpm.
Hi all ,i have a dbscar5 flashed to X-DIAG ,now i want to use with Original Launch account ,how do i flash back ?
any guys have the dump or bin firmware files ?
Anyone help me with radio Bosch from Renault Trafic. I have on display radio locked. I try waitnig 2-3 hours but still have Radio LOCKED. Radio is original from car. I read eep 95256
Does Someone have a Stock TCU File for that Car? I need to have Ori file because i suspect that someone did make Changes in the File and i need to fix it.
Land Rover Range Rover 5.0 Supercharged
Year: 2014
Control Unit Serial Number: 5801441140849137
Control Unit Hardware Number: DPLA-7000-CC
Control Unit Core Assembly Number: BH42-14C247-HC
Boot Software Identification: BH42-14C471-HB
TCU Software Number: DK62-7J104-BBG
Read That i did is in Attatchments. One read is with BFlash and the other read is with HPTUners MPVI3
Hello, I have a Peugeot 206 EDC15C2 that they immo off, but the vehicle stays at 3000rpm, I would appreciate if someone could send me the original files of the same ECU that has 1 plug or help me solve it
I recreated the lane camera calibration board, printed it and tested. It works! Here you can download the PSD file and print it with industrial printer from your local ad company and use it to static calibrate lane camera for VAG cars (best with ODIS)
Tested and confirmed ✔ FREE & NO PASS, kindly leave rep if you benefit. (PM if link expires)
