i need help, i have a Nissan 370z. The customer modified the exhaust, catalytic converter, and pistons.
Now, with the stock software, the car has 311 ps instead of 344 ps, and even with tuning,
I only get about 340 ps.
If someone has done an original Dyno run and could send it to me, I would be happy
Deutz DeCOM is a diagnostic tool interface, often used with SerDia software, for diagnosing and programming Deutz controllers, particularly those in trucks and other machinery
It allows technicians to access and interact with the electronic control modules (ECMs) of Deutz engines and machinery
Serdia 4.0 with level 6
license lifetime by USB Dongle
Hello,
I have a 2000 Mazda B2500 with a Mitsubishi immo box
UJ13675G2C
9002280421
and need the PIN code.
The car doesn't have an ECU to read the EPROM—at least I can't find one.
The box and the immo part are on the solenoid valve on the pump. Does anyone have a way to get the PIN with the
serial number?
Thanks in advance
Hi everyone,need to write stock back on bmw e70 2012 US edc17cp09
I think I can use Winkfp
And the question is can I use k-dcan cable with this ecu and flash via obd ? Doesn’t have icom ,have enet cable (don’t know if this work with winkfp)
I Got the 1.3 fiat 2015 width DPF clogged because pipe from intercooler was cut
Now I need to delete SCR and DPF , but there are no way to disconnet SCR ECU , because the sistem go crazy and Adblue check in Dash
Who can Help me width this ?
Hello Guys... I've to do hard cut on edc17c74 and the car (golf 7.5) has dsg.
I usually do the rev like this and it has always worked (manual transmission car). On this one if I do it the same it doesn't work... here's a video as you hear it doesn't go pa pa pa pa pa at 4500rpm.
Is the problem given by the fact that the transmission is automatic? In this case what do I have to change? thank you very much :-)
Hello. I want to flash ntg 4.7. I have cff files and a burned Telematics disc. When I do this in vediamo an error pops up.
The case looks like this: I have a car from the USA, it was Ntg4 but I changed it to ntg 4.7. Everything works, but there are a lot of errors related to navigation. It turned out that the files I want to upload cff I have exactly the same ones already uploaded to the radio (supposedly the latest software).
But in Xentry it shows that there is no Telematics disk installed. Is it possible to upload Telematics disk without flashing? Because in DTS Monaco it is also not possible to do it on openport 2.0 with cbf files?
Hey everyone,
Does anyone know how can I diagnose a Chinese 2021 Captiva. The GDS software i use does not support the Chinese Version of Captiva.
Is there any other version for that or a different Software?
Regards
![[Image: 25031317419312818999.jpg]](https://www.eobdtool.co.uk/upload/pro/25031317419312818999.jpg)
![[Image: 1-3.jpg]](https://www.autoepccatalog.com/wp-content/uploads/2023/11/1-3.jpg)
![[Image: Deutz-Serdia-4.0.jpg]](https://www.autoepccatalog.com/wp-content/uploads/2025/03/Deutz-Serdia-4.0.jpg)
