Can someone to help with this auto. I took this from enother service. Someone have done DPF off but not to end. I have dct P24c6, this is sensor of NOx. Can someone to erese this dct from mask and to erese complitly sensor of NOx fom sistem? Read by PCMFlash in bench.
hi friends. hope all your ok.
i have gle edc17cp57. I did all reseted and did it scr off with swiftec, davinci, fixwave and the warning message in display (CHECH ADDETIVE) not going. i unpluged the src and coding ic but nothing changed. any help please?
Thank You.
Hi
The car is a Mercedes in 204 2008year.
The car does not have wipers, washers, hazard warning lights, seat heating. I do not know the history of this car. The car was bought in this condition in Norway. It seems to me that the eeprom in SAM is damaged.
Is anyone able to check the eeprom dump from SAM?
Need a original file for this van as the one that is on the ecu is already touched. Its not posible to update with Autel this ecu so i need a good obd file if possible.
I have read it with PCM Flash.
Hallo zusammen,
Aktuell suche ich Unterstützung bei der Nachrüstung des Widescreen-Cockpits für verschiedene Mercedes-Modelle, unter anderem für:
W213 (E-Klasse)
W247 (B-Klasse)
W177 (A-Klasse)
... und möglicherweise andere in der MBUX/NTG6-Familie.
Besonders wichtig sind mir die korrekte Codierung, die Hardwarekompatibilität und die Begleitung bei der Umrüstung. Idealerweise suche ich jemanden mit Erfahrung in diesem Gebiet aus dem deutschsprachigen Raum (Deutschland, Österreich, Schweiz) , da dies die Kommunikation erleichtern würde.
Natürlich bin ich bereit, für professionelle Hilfe zu bezahlen – Fernunterstützung oder sogar persönlichen Service, wenn möglich.
Wenn Sie ähnliche Umbauten bereits einmal durchgeführt haben oder jemanden kennen, der sich auf derartige Arbeiten spezialisiert hat, würde ich mich über Ihre Nachricht sehr freuen.
Danke im Voraus!
Beste Grüße,
I’ve been doing some digging online, and I keep coming across posts about different tools for datalogging and using a virtual dyno. Some people swear by certain setups, others say they’re not accurate at all.
I’m trying to find out what actually works well in real-world use. What are you guys using for datalogging? And is there a virtual dyno tool that gives reliable, consistent results (assuming decent logs)?
Looking for something that’s user-friendly but also accurate enough to tune off of or at least get a solid baseline. Appreciate any feedback or experience you can share.
I have to replace my N22 AAC [KLA] control and operating unit and my question is can i use an used one? The used one has identical partnumber as the one in the car.
My car is a 2006 Mercedes ML w164 320 cdi. Vin:WDC1641221A114812
Hello,
Can someone help me remove these DTC I have been trying for hours with Winols but I am still not quite there. So if anyone can help me out it would be really appreciated.
the car is a land rover Evoque 2012 ECM is MED 17.2 Read fine with Ktag.
Need these off
P0016 P0017
P0008 p0009
Thanks for helping
Al
https://easyupload.io/ysoj2d
hi i have truck iveco with edc17cv41 software number 511206 0281020146 Iveco stralis 480hp and i need original i have a few with same sw version but software inside is different and i poated actually the sofr what i read here on the link if anybody have this please share with me
Hello experts. I need help with ISK code from eeprom of engine ecu DCM1.2 from Modus. Someone before me has virgin UCH and i can not get engine ecu to paired with UCH.
Ori file attached.
Thank you
Hi!
Can be done remove dash fault trailer automatic defect..
BMW f16 2018
AHM module have adaption error , trailer rusty and water damaged.
customer wants remove check light. he dont need trailer!
Hi, I have 3 frf files for ECU of my CVUA Audi engine and I would like to visualize the maps and some stuff in WinOLS to understand the differences between them.
Can anyone please just convert these for me ? ChatGPT is helping me understand how these things work so I can visualize the maps in WinOLS but so far I had no luck converting them.
Hi guys, I have a ecu from a beetle, when I write it with FVDI it goes to XXXXs, car starts because is immo off, I need it to 3VWSW21C69M514471 with immo off, thank you in advance!
(04-23-2025, 01:03 PM)japure90 Wrote: Hi guys, I have a ecu from a beetle, when I write it with FVDI it goes to XXXXs, car starts because is immo off, I need it to 3VWSW21C69M514471 with immo off, thank you in advance!
(04-23-2025, 01:03 PM)japure90 Wrote: Hi guys, I have a ecu from a beetle, when I write it with FVDI it goes to XXXXs, car starts because is immo off, I need it to 3VWSW21C69M514471 with immo off, thank you in advance!
(04-23-2025, 01:03 PM)japure90 Wrote: Hi guys, I have a ecu from a beetle, when I write it with FVDI it goes to XXXXs, car starts because is immo off, I need it to 3VWSW21C69M514471 with immo off, thank you in advance!
Bonjour à tous, je recherche une solution pour supprimer la limitation de vitesse à 30 km/h sur mon véhicule. Si quelqu'un maîtrise la technique et a déjà testé certaines choses, n'hésitez pas. L'ECU est un MD1CE101. J'ai cherché longtemps, mais je n'ai pas trouvé. Je paierai sans hésiter pour une solution fonctionnelle. Merci .
I'll try to ask for your help, does anyone have the latest FW version for this radio? I've searched the internet and when I found something I wasn't very sure it was the correct file. So that's why I would like to ask you to provide the file to burn to CD and install the update. Thank you very much for your help.
![[Image: s-l1600-2.webp]](https://i.postimg.cc/HWf2NfZz/s-l1600-2.webp)
