hello all,
Car not start not turn engine and testing relay BLUE is ok, there is a problem the control unit is not compatible I have touched another mechanic workshop EDC16C1 0281011121 BMW x3 (E83) 3.0d..
I'm surprised it's not normal the control unit is not compatible E46 3.0d
I want to know what is the BMW 330d E46 original reference EDC16C31 ?? ECU Ref: 0281 xxx xxx xxx ??? (Search List Ecu Compatibility)
Make:Bmw
Model:330cd
Fuel: Diesel
Displacement:2993 cc
Engine: M57D30
Power:204 hp (150 kW)
Seating:5
Homologation:EURO 4
Vin: WBABV91010PJ90036
Hello, I have an NBT EVO ID6 that has been programmed for my F30 LCI. It is a retrofit.
Once installed in the car, it shows the boot logo and the radio plays briefly, then it shuts off. E-Sys can see it, and ISTA gives me the anti-theft protection error B7F87A. How can I restore it? This is the video. Sorry if I'm not making myself clear, I'm using a translator. Thanks to anyone who is helping me
Thank you
Hi!
I am sharing last version (9.242.0.0_RC1) of Renault EURO5 EURO6 Reprogramming Module from ASOS After-Sales Europe Portal (asos.renault.com).
To use this module you need Physical USB Token and Online Tokens from ASOS.
Press REP+Thanks, then ask pass in PM!
Sending passwords every day at 18:00 GMT.
John Deere Service Advisor 5.3
2024 database on panasonic toughbook cf-53
with v.2 adapter $2000
ready to go
pm for questions
one year warranty
24/7 support via teamviewer or phone
Hello guys! as the tittle says im new to the forum and on ecu tuning, reading almost for a year i thought i should buy an mpps v18 clone, all good, i got the full read on my ecu (ecu is tuned 2 years ago on stage 2 as the tuner said because of aftermarket parts especially hpfp upgrade, fmic and 70mm downpipe), i went to stagex as i dont find any good winols for the beginning and make some tweaks, i tried to make launch control but as what i saw on vcds after flashing, esp/abs, error for transmission electronics, maybe works only on dsg? for sure u can make this on winols but for me is a no no without the proper knowledge, after that i tried pop and bangs but i heard nothing in rev, anyways i flashed back the stage 2 as i have before and its just the same, but im wondering:
1) I want to upload the tune here just to see you guys as professional tuners if the tune is okay and i will really appreciate that.
2) if you have something to tell to a new person on ecu tuning industry and i know specifically that knowledge never ends and for you also as professionals.
3) where do i find damos for my ecu to play a little bit, and where do i find a more stable winols even on windows 7 or 10 i have both. (probably i will proceed this summer with the genuine winols but yeah i just want to play with my ecu and only).
Hello everyone. i purchased a obdstar key master dp on ebay and it didnt come with a vci. ill link a pic of what it looks like. anyone got one or know where to get one? i contacted obdstar sales and they said they dont have any because its an older system and they dont carry the vci anymore due to that. anything will help
Hi everyone, I have a 2004 BMW 530d with a 6hp 26 transmission that has a Z83 converter. Does anyone know if I can install the F85 from the 535d pre-LCI?
Or install the entire 6hp 26 transmission from a BMW 535d 272?
Thank you very much.
What tools can be used for getting connection with this new model ECU?
I have done an older 2012 90hp with KTAG boot mode. Flex doesnt support any of theese ecu.
I have seen that nowdays you could do it thru diagnostic port also.
Bonjour, je recherche un brochage pour connecter mon calculateur Continental à mon Godiag afin qu'il fonctionne avec mon Renolink. Je ne trouve pas de schéma correct. Marque : Continental
Hello everyone. Does anyone have experience hacking vci c6 MTS6532? The goal is to change the serial number. There is a nand dump, ubifs is encrypted, I can't attach uart logs, I don't know the checkpoints for connection, I don't really want to raise the SoC yet. In general, you can try to reconfigure the processor to boot from microSD using bootstrap, but there is a chance that SoC will not accept a custom bootloader without a signature. Well, to find out bootstrap, you need to raise the SoC. If anyone needs a NAND dump to try to extract files, write to me, I'll send it.
Hi we have a Nissan Navara 2.3 twin turbo 2019 the vehicle has no turbo boost at low seed and rpm it will boost over 3000rpm. DTC was p2263
I have checked the vacuum lines to and from both vacuum valves on front of engine also swapped the valves with known good ones. Check the turbo actuators they both work freely and hold vacuum.
Removed the larger turbo (low pressure I belive) and checked vanes and movement, used a camera to check smaller turbo (high pressure I belive) its not siezed and vanes look good.
Checked turbo exhaust manifold pressure sensor and pipe is clear.
Swapped MAP sensor and MAF sensor for known good ones.
Intercooler and pipe work smoke tested ok.
Watching required boost to actual, the actual boost is not rising only at higher rpm over 3000.
Vheicle has no power driving on road at low down speeds.
Hello I am starting this tread to make this ecu more readily available to tune and make it easier to understand with team effort. I am attaching a damos and 34 maps I found in my file. With team effort we can find all the necessary maps hopefully. The car is Land Rover Discovery Sport 2.0 TD4 MEDC17.9
Code:
High Range High Speed torque map, High Range Low Speed torque conversion map, Injection volume map during function monitoring, Map for conversion of injection volume to energizing time, Injector closing time (time between end of energizing and closing of the needle), Curve to calculate the higher threshold for the injection quantity for the release of first load point, Curve to calculate the higher threshold for the injection quantity for the release of second load point, Curve to calculate the higher threshold for the injection quantity for the release of third load point, Curve to calculate the lower threshold for the injection quantity for the release of first load point, Curve to calculate the lower threshold for the injection quantity for the release of second load point, Curve to calculate the lower threshold for the injection quantity for the release of third load point, Enginespeed threshold over there is an level 1 limitation by continous torque monitoring possible, Map for level 1torque limitation offset (n-synchronous calculation), Map for level 1torque limitation offset (t-synchronous calculation), Pressure Desired Base 2 EOM Quantity 3, Pressure Desired Base 2 EOM Quantity 4, MAP: Base setpoint map 2 for boost pressure in EOM0 mode, Pressure Desired Base 3 EOM Quantity 3, Pressure Desired Base 3 EOM Quantity 4, MAP: Base setpoint map 3 for boost pressure in EOM0 mode, Pressure Desired Base 4 EOM Quantity 3, Pressure Desired Base 4 EOM Quantity 4, MAP: Base setpoint map 4 for boost pressure in EOM0 mode, Map: base boost pressure setpoint value for the first injection-quantity-based operating mode, Map: base boost pressure setpoint value for the second injection-quantity-based operating mode, Map: base boost pressure setpoint value for the third injection-quantity-based operating mode, Map: base boost pressure setpoint value for the fourth injection-quantity-based operating mode, Map: base boost pressure setpoint value for the fifth injection-quantity-based operating mode, Map: altitude-dependent base boost pressure setpoint value, Map: altitude-dependent base boost pressure setpoint value for the first injection-quantity-based operating mode, Map: altitude-dependent base boost pressure setpoint value for the second injection-quantity-based operating mode, Map: altitude-dependent base boost pressure setpoint value for the third injection-quantity-based operating mode, Map: altitude-dependent base boost pressure setpoint value for the fourth injection-quantity-based operating mode, Map: altitude-dependent base boost pressure setpoint value for the fifth injection-quantity-based operating mode, Map: base boost pressure setpoint value, Map for the upper limit of the boost pressure setpoint value
Car is Ford Focus 2013, I tried change mileage in eep 95320, but after rewriting eep it show ERROR instead mileage. I tried write back original eep but still the same.
Here is ori with approx 360000km and mod with 210000km.
Could someome help me out with wiring diarams for BMW 216i 2014. I need engine diagram for exhaust vanos solenoid and O2 sensor (heater) before CAT. I tried looking and my ISTA (maybe to old), Autodata, Carmin but there is none. Engine code is B38A15.
![[Image: renault.svg]](https://mhhauto.com/mhhrespo/images/posticons/renault.svg)
